Aero Thru-Axle Installation - Cervélo R5-CX Assembly Manual

AERO THRU-AXLE INSTALLATION

6mm Allen key /
torque wrench
or
Cervélo Aero
Tighten
Thru-Axle with
front axle
Removable Handle
to 12-15Nm.
(QRA-AERO2-F,
QRA-AERO2-R &
QRA-AERO2-HNDL)
21
To secure wheels, install the greased axle, through the drop
out and the wheel hub, aligning the threaded end of the axle
with the threaded insert. Once aligned and engaged, thread
the axle (clock-wise) into the threaded component of the insert
until the axle is secured tightly.
To ensure rider safety, it is critical to install the Cervélo
Aero Thru-Axle correctly. Failure to do so may result in an
accident with potential for serious injury to the rider.
Tighten rear axle
to 12-15Nm.
Perform final tightening on
Rear Derailleur Hanger Nut
using a 17mm wrench. Torque
to 12-15Nm. This action is
unique to initial assembly,and
should not require additional
adjustment.
Adjust brakes as per manufacturer's
instructions.
22