Table of Contents
Advertisement
5.4 Show Program
May 2003
This submenu is used to display the parameters that have been defined for a
program.
The displayed parameter settings can not be altered in this submenu.
Show
XX:yyyyyyy
-
+ other yes
Print List now ?
YES
NO
Printing......
Plate Type:
exit yes
Manifold Type:XX
exit yes
Disp Rate:
exit yes
Asp Rate:
exit yes
Plate type
Round bottomed
Crosswise:
exit yes
Sel. Strips: XXX
exit yes
Mode:
exit yes
C:1
P:1
-
+ Exit
Show
XX:yyyyyyy
-
+ other yes
Instructions for Use for Columbus Washer No. I 109 006 Rev No. 2.2
Select required program to be
shown
If printer option fitted, select if
parameters are to be selected or not.
Parameters being printed
Selected plate type displayed
X
Selected manifold type displayed
Selected dispensing speed (1 - 5 or drip)
X
The speed of the dispensing pump.
Selected aspirating speed
(1 - 5 [8 or 12 way manifold]
or 1 - 3 (16 way manifold or 384 Well
X
Manifold)
The speed of the aspirating pump.
Plate type
Flat bottomed
Selected setting for crosswise aspiration
XX
Selected setting for strip selection
Selected operating mode
Xxxxxx
(strip or plate)
Select required process step to be shown
XXXX
yes
using - and + keys or press yes to step
through all steps and settings
5. Programming Procedure
5-7
Advertisement
Table of Contents
