Installation And Operation; Mounting And Operation - ProLights CONFETTIGUNNER User Manual

Electric confetti and streamer gu
Table of Contents

Advertisement

- 2 - INSTALLATION AND OPERATION

2.1 MOUNTING AND OPERATION

CAUTION - The machine can be damaged if you do not follow the procedures carefully.
DANGER WARNING - The CONFETTIGUNNER may only be installed by adults and authorised persons.
Prepare the CONFETTIGUNNER for use as follows:
coNfEttigUNNER
Place the CONFETTIGUNNER on an even, solid
and stable surface and secure it with the notch-
es made for this.
NOTE
Attach the CONFETTIGUNNER to a Base Plate for
an extra stable surface. It is possible to attach 1,
2 or 4 CONFETTIGUNNER to the Base.
If you want to use the CONFETTIGUNNER
while mounted in a truss system, then attach
2 certified truss clamps to the underside
of the CONFETTIGUNNER. Next, place the
CONFETTIGUNNER on the required place in the
truss system and firmly turn the clamp.
The mounting place must be of sufficient stabil-
ity and be able to support a weight of 10 times
of the unit's weight. When carrying out any in-
stallation, always comply scrupulously with all
the regulations (particularly regarding safety)
currently in force in the country in which the fix-
ture's being used.
IMPORTANT
Always additionally secure the projector with
the safety rope from falling down. For this pur-
pose, fasten the safety rope at a suitable posi-
tion so that the maximum fall of the projector
will be 20 cm.
7

Advertisement

Table of Contents
loading

Table of Contents