HBM GK7000 Operating Manual page 32

Setup and operate the GK7000 / GK7600
S Result panel:
selection of the min­ max­values indicated on the status­line on the
main­screen. 2 indication are possible
S GK7000 / GK7600:
access to the hardware related adjustment of the GK7000 / GK7600:
- Backlight: brightness of the display
- Calibrate: calibration of the touch­display of the GK7000 / GK7600
- Network settings: same like settings in the main menu
- Explorer: access to explorer on the GK7000 / GK7600
- Control panel: access to control­panel of GK7000 / GK7600 (necessary
for further GK7000 / GK7600 adjustments, e. g. automatic switch­off of
the display)
S About:
indicates status of memory on the GK7000 / GK7600, identification of the
MP85 with firmware hardware version and the release­notes of the software
EASYmonitorCE
S Retrieve saved data:
reload and indicate stored data with process­curve and results from targets:
- MMC/SD­card in the MP85
- Flash­memory of the GK7000 / GK7600
- Cash in the GK7000 / GK7600
- Network (sever or PC)
S A statistics graph for extreme values in each tolerance window is addition­
ally available. Process curves and result files in the temporary memory of
the GK7000 / GK7600 or on the memory card of MP85 can be deleted man­
ually.
S Zoom options:
Setting options for the graphic illustration of the process curves on the main
screen: manual zoom or zoom to the alarm or range window of the MP85.
30
A03435_01_Y00_01 HBM: public
GK7000 / GK7600