8
Setup and operate the GK7000 / GK7600
8.1
Connect the GK7000 / GK7600 with the MP85
Commissioning
S Mount and connect sensors and power supply to the MP85, refer to the
manual.
S Connect Ethernet from MP85 to GK7000 / GK7600 (peertopeer) or in a
Network via a EthernetSwitch. Use standard Cat5 cables, check if
GK7000 / GK7600 is doing autocrossing, if no use crosscable. (GK7000 /
GK7600 has autocrossing and needs only 1:1 cable)
S Connect power to the GK7000 / GK7600 (GK7000 10...24 V DC, GK7600
11...36 V DC), refer to manual.
8.2
Quick Start Guide
Switch GK7000 / GK7600 on via On/Off switch on the frontside, the IPC
startlogo appears.
After some seconds the EASYmonitorCE Versioninfo and the Networkscreen
appears.
Tip
On the GK7000 / GK7600 a software keypad pops up if numbers or text has
to be entered.
For number entry:
Fig. 8.1
Software keypad
GK7000 / GK7600
Setup and operate the GK7000 / GK7600
A03435_01_Y00_01 HBM: public
19