Data Storage - HBM GK7000 Operating Manual

Important
For more information please access the software help for EASYmonitorCE,
which is available on each page via the
instructions of the MP85 measuring amplifier.
8.5

Data Storage

Process data (measuring curves and results) of the MP85 amplifier can be
stored on the SD card of the MP85, on the GK7000 / GK7600, USB stick or on
the network PC/server. Every storage option offers the storage options "With­
out data loss" and "Process-optimized".
Important
Pleased note that the MP85 will always attempt to store the process data with
the option "Without data loss" enabled. Where that is not possible, the MP85
will be unavailable for further processing short term, as the internal memory
can only store around 10 processes at a time. This may cause the entire
process to come to a halt (machine downtime).
Process data can then no longer be stored when the selected storage medium
is full or if the network connection to the selected storage medium (GK7000 /
GK7600) or network PC is interrupted.
The process data is stored on the GK7000 / GK7600 in the folder "Flash disc
1". The folder offers 2 GByte storage space, which suffices for approx. 600,000
process curves with results.
The storage status can be viewed in the menu "About" (admin level). Log in
with the master password "6151" to delete the memory content. EASYmoni­
torCE can only be closed via the "Exit" button when the master password is
entered. Then open the file explorer of the GK7000 / GK7600.
With the setting "Process-optimized" enabled, the MP85 ignores whether or not
process data can be stored completely and continues processing. There may
be some data loss, but MP85 and therefore the process will not come to a
standstill.
GK7000 / GK7600
Setup and operate the GK7000 / GK7600
A03435_01_Y00_01 HBM: public
button, or read the operating
31