HBM GK7000 Operating Manual page 24

Setup and operate the GK7000 / GK7600
S Type in IPAddress of the selected MP85 and open the connection using the
button.
S The graphical main­screen of EASYmonitorCE appears.
b) MP85 connected via DHCP
Set IP-address of MP85 and GK7000 / GK7600.
The set GK7000 / GK7600 in DHCP­mode use button "Change network set­
tings", enter correct passcode and mark the Checkbox "DHCP enabeled".
See the network settings of the GK7000 / GK7600 and set the IP­Address of
the MP85. Only the last segment has to be different, e.g.
IP­address MP85
Gateway address
S Close the dialog with
S Type in IP­Address of the selected MP85 and open the connection using
the button.
S The graphical main­screen of EASYmonitorCE appears.
Important
The info line at the bottom of the screen displays current alerts regarding the
connection status and the IP address/port of the MP85.
22
172.21.108.237
255.255.255.0
button.
A03435_01_Y00_01 HBM: public
GK7000 / GK7600