Setup and operate the GK7000 / GK7600
For text entry:
Fig. 8.2
Software keypad
Keyboard is country sensitive, "ENTER" key
is on the character side,
you can switch from one to the other using
or
.
With the ScanFunction the software does a scan on the network and indic
ates all MP85devices running in the network. To enter the selection, just tick
on the needed address.
Offlineversion of the EASYmonitorCE can be started by ticking the
but
ton. In this case no MP85 has to be connected with the GK7000 / GK7600
(usefull to visualize stored data or to setup or modify stored parametersets or
read LOGfile).
The default passcode of the EASYmonitorCE is "1111", and can be modified.
Dataentry: Finish the data entry with button
. If a reset of the GK7000 /
GK7600 is recommended agree with
button.
Data entry will be not applied if the "Close" button is used to leave the dialog.
Each page contains a Help button
. Clicking the button will open the asso
ciated Help page.
Settingup a networkconnection
Please note that a WLAN adapter must be installed on the GK7000 / GK7600
for the option "WLAN" (a WLAN USB stick is available as an optional acces
sory).
20
GK7000 / GK7600
A03435_01_Y00_01 HBM: public