Check Belt Message - ZOLL LifeVest 4000 Patient Manual

Check belt message

After you get a number of belt problem screens, you may get this
message. It means that the monitor is still not receiving a good signal
from the electrode belt.
If you get this message:
1 Disconnect the electrode belt from the monitor.
2 Take off the garment and make sure that nothing is covering the
metal surfaces of the ECG electrodes.
3 Put a dab of unscented hand lotion, skin cream, or moisturizer on the
surface of each ECG electrode (the round ones, not on the therapy
pads).
4 Put the garment on and connect the electrode belt to the monitor.
While you're wearing the LifeVest, tap the help button
reminders about what to do.
If problems continue, call ZOLL.
Responding to alarms
for
Page 5-15