SelectBlinds Architect Installation Manual

Panel track

Download this manual

Installation - Panel Track with Motorization

Read the instructions carefully before assembling and using the product. Assembling process can be completed

by non-professionals. For indoor use only.

WARNING

● Young children can strangle in the loop of pull cords, chains and tapes, and cords that operate window coverings.

● To avoid strangulation and entanglement, keep cords out of the reach of young children.

Cords may become wrapped around a child's neck

● Move beds, cots and furniture away from window covering cords.

● Do not tie cords together.

Make sure cords do not twist together and form a loop.

max. 100mm

max. 4 inches

Click!

INSTALLATION

MANUA L

max. 800mm

max. 31.5 inches

Click!

1 1

max. 100mm

max. 4 inches

Click!

Need help?

Do you have a question about the Architect and is the answer not in the manual?

Page 1 INSTALLATION MANUA L Installation - Panel Track with Motorization Read the instructions carefully before assembling and using the product. Assembling process can be completed by non-professionals. For indoor use only. WARNING ● Young children can strangle in the loop of pull cords, chains and tapes, and cords that operate window coverings. ●...
Page 2 INSTALLATION MANUAL Hanging panel with velcro...
Page 3 INSTALLATION MANUA L...
Page 4 INSTALLATION MANUA L Control Take care that the blind can move freely and is not blocked by objects.
Page 5: General Information
2. Programming 2.2 Programming a blind Manual To program a blind: 1. Pair a blind to a channel Remote control 1. Set blind in program mode, chapter 2.1 To pair a blind to a channel, the blind must be in program mode. 2.
Page 6 4. Remote Holder 5. Set blind in BatteryMode (Greenmode) To program a blind, the blind must be in program mode. Important: BatteryMode can be only turn on by using SingleSelect method, see chapter 2.1 how to set a blind in program mode en exit program mode by single select.

ModernPremierNomad