Save And Abort - Newland NLS-FM100-M-U Integration Manual

Appendix Appendix

Save and Abort

In order to save the received data "Save" has to be read after data transition
completed. If error occurs when reading data,
the wrong data can be deleted and the setting up can be done again..
Eg, after a program code is received then '1 2 3" in order is received, if then
read "Abort One Data of Current Setting" the "3" will be deleted; if read
"Abort One String of Current Setting" the '123' will be deleted; if read
"Abort Current Setting" both the program code and '123' will be deleted,
the device will be on status of "initiating program code".
【Pro CMD：99900020】
Abort One Data of Current Setting
【Pro CMD：99900021】
nlscan.com
Save
Code Programming ON Code Programming ON
Code Programming OFF Code Programming OFF
Abort Current Setting
【Pro CMD：99900023】
Abort All String of Current Setting
【Pro CMD：99900022】
Tools Tools
Page 120