Advertisement
Quick Links
Advertisement
Related Manuals for Otto Bock iFab EasyScan
Summary of Contents for Otto Bock iFab EasyScan
- Page 1 EasyScan Quick start guide...
- Page 2 Please note: A limb model is available but not required to learn how to use iFab EasyScan most efficiently and properly. For this purpose the model is prepared with landmarks needed to conduct a scan for custom liners.
- Page 3 Positioning the object and start scanning Different colors indicate whether the object is within or outside the detectable scan volume. Red indicates • the object is outside, green indicates the object is inside the detectable reach of the camera. Hold the cam- era parallel to the surface of the object.
- Page 4 Light Conditions For optimal scan results, please avoid areas with too little or too much light (e.g. in front of a window or in • an unlit workshop). Normal room light conditions generate the smallest deviations of the scan and provide you with a good •...
- Page 5 Review, cropping and finish a scan When the object has been captured completely, review the scan result clicking on “Pause scan”. In case of • uncaptured areas you can return to scanning mode and complete the scan Crop areas out of interest using the cropping tool in this section. Open the tool with the icon in the top left •...
- Page 6 Ottobock US · P 800 328 4058 · F 800 962 2549 · professionals.ottobockus.com Ottobock Canada · P 800 665 3327 · F 800 463 3659 · professionals.ottobock.ca...