Advertisement
Review, cropping and finish a scan
When the object has been captured completely, review the scan result clicking on "Pause scan". In case of
•
uncaptured areas you can return to scanning mode and complete the scan
Crop areas out of interest using the cropping tool in this section. Open the tool with the icon in the top left
•
corner. Draw a line between the area remaining after cropping and the area to be cropped away. Invert the
direction of the cropping area if necessary. When satisfied with the selection apply the cropping
ee
•
Save the scan to the job list with "Finish Scan". Note: Cropping cannot be undone after this point
•
Complete the job and upload
The completed job can be found in the job list waiting for fina-
•
lization. Start finalization with the button
the upload package is created. After finalization upload the
job package to the iCC with the button
access the scan file
Uploaded jobs are moved into the archive. Jobs can be moved
•
back to the job list by clicking on the three dots
Access the scan file
To access the scan file, switch to the iCC either through the
•
menu in the top left corner of the application or access the web-
site www.ifab-customer-center.com
Go to the "Scan List" which can be found in the header under
•
your name
Select the scan to be downloaded. Review the scan in 3D-view.
•
Start the download via the download icon
the file type of the 3D scan
The scan will be downloaded to the directory on the local
•
machine as a zip package. Unpack the zip package to use the
3D file for further processing
. During this step
. From there you can
and choose the
11
Advertisement
