Follow the following instructions to set wired LAN parameters:
Click the 'LAN' menu on the left of the Web management interface. There
are three setup groups here: 'LAN IP', 'DHCP Server', and 'Static DHCP
Leases Table'. Here are setup instructions for each of them:
2-6-1 LAN IP section:
Items and meanings:
IP address (1):
Subnet Mask (2):
802.1d
Spanning Tree (3):
DHCP Server (4):
Recommended values if you don't know what to enter:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
Enter the IP address of this router.
Enter the subnet mask for this network.
If you wish to activate the 802.1d spanning tree
function, select 'Enabled' for setup item '802.1d
Spanning Tree', or set it to 'Disabled'.
If you want to activate the DHCP server function of
this router, select 'Enabled', or set it to 'Disabled'.
1
2
3
4