Table of Contents
Advertisement
Click 'Continue' to go back to the previous setup menu and to continue
with the router setup. Click 'Apply' to reboot the router so the settings
will take effect. Please wait for about 30 seconds while the router is
rebooting.
NOTE: Some wireless clients (especially those manufactured before
2003) only support WEP or WPA (TKIP) cipher. A driver upgrade would
be needed for those clients to be able to use WPA and WPA2
encryption.
2-7-3-4 WPA RADIUS:
If you have a RADIUS server, this router can work with it and provide
safer wireless authentication.
Items and meanings:
WPA Unicast
Cipher Suite:
RADIUS Server
IP address (3):
RADIUS Server
Port (4):
RADIUS Server
Password (5):
Select a type of WPA cipher suite.
Available options are: WPA (TKIP), WPA2 (AES),
and WPA2 Mixed. You can select one of them, but
you have to make sure that your wireless client or
network card supports the cipher you selected.
Enter the IP address of your Radius
authentication server here.
Enter the port number of your Radius
authentication server here. The Default setting is
1812.
Enter the password of your Radius
authentication server here.
1
2
3
4
5
6
Advertisement
Table of Contents
