Removable Headboard; Bearing Area - PROMA REHA VERTICO Instructions For Use Manual

Hospital bed with verticalization for standard care
Table of Contents

Advertisement

12.2 R
H
EMOVABLE
The hospital version of the bed is provided with a removable headboard with
arresting against accidental removal.
To remove the headboard observe the following instructions:
Unlock the green arresting levers of the board (1) upwards
Take out the board from holders upwards (2)
To insert the board back, proceed as follows:
Insert the board into the holders (labels and logos should be directed out
of the bed)
Secure the boards with green levers (1) by tilting down (Do not force
the levers unnecessarily, it is easy to tilt the safety levers when the board is
properly mounted).
Make sure that the board is properly secured against pulling out
When re-inserting the headboard in the holders, pay extra attention to the correct
insertion. If the board is incorrectly or insufficiently inserted, it will not be possible
to secure it and the locking mechanisms might be damaged. Always make sure that
the board is properly secured before using the bed.
Always make sure that the board is properly secured before
using the bed!
If the bed is fitted with the headboard, it must always be
properly fixed in the holders. Otherwise, the board may be
removed from the bed during handling accidentally. It
could damage the arresting mechanism or cause bodily
harm!
12.3 B
A
EARING
REA
The bearing area is made of metal profiled lamellas tightly fixed to the bearing area. The main advantages of these materials are their
high resistance to chemical products used in health care, surface stability and resistance to wetting.
Under the bed bearing area, where motion mechanisms are placed, there might exist places with the increased
risk of injury to the operator or a third person due to catching or squeezing. Do not interfere unnecessarily
with the space under the bearing area!
The space under the bearing area may only be entered for maintenance or cleaning purposes. When cleaning
and maintaining, always ensure that the bearing area and all its parts are secured against movement. This
will prevent possible risks!
Instructions for Use of VERTICO Bed
EADBOARD
Page 18/32
2
1
1

Advertisement

Table of Contents
loading

Table of Contents