Table of Contents
Advertisement
Quick Links
INSTRUCTION
VERTICO
Hospital Bed with Verticalization
for Standard Care
PROMA REHA, s.r.o.,
ver. 21-1
Riegrova 342, CZ-55203
19/02/2021
Česká Skalice, tel.: +420 491 11 22 33, fax: +420 491 54 11 85,
Company ID: 63219107; Tax ID: CZ63219107,
info@promareha.cz, www.promareha.cz, registered in the
Commercial Register held with the Regional Court in Hradec
we are authorised to use the above-mentioned trademarks
Králové, section C, entry 7945
Advertisement
Table of Contents
Related Manuals for PROMA REHA VERTICO
Summary of Contents for PROMA REHA VERTICO
- Page 1 INSTRUCTION VERTICO Hospital Bed with Verticalization for Standard Care PROMA REHA, s.r.o., ver. 21-1 Riegrova 342, CZ-55203 19/02/2021 Česká Skalice, tel.: +420 491 11 22 33, fax: +420 491 54 11 85, Company ID: 63219107; Tax ID: CZ63219107, info@promareha.cz, www.promareha.cz, registered in the...
- Page 2 Czech and foreign markets for more than 25 years. The products of PROMA REHA, s.r.o. are known due to their modern light structures, which, despite their low weight, achieve state-of-the-art parameters, strength and utility reliability.
-
Page 3: Table Of Contents
Instructions for Use of VERTICO Bed ABLE OF ONTENTS Introduction ....................................5 Method of Delivery ..................................5 Safety Instructions ..................................6 Conditions of Use ..................................7 Technical Parameters ..................................7 Bed Location ....................................8 Bed Description ..................................... 9 Installation and Commissioning of the Bed ..........................10 Relocation and Handling ................................ - Page 4 Instructions for Use of VERTICO Bed Cleaning ....................................... 25 Storage ......................................26 Maintenance and Service ................................27 Warranty ...................................... 27 Product Disposal ..................................28 Abbreviations, Signs and Symbols Used ............................. 29 20.1 Bed manufacturing label............................... 29 List of Supported Accessories ..............................30 Package Contents ..................................
-
Page 5: Introduction
Instructions for Use of VERTICO Bed NTRODUCTION These Instructions are intended for the beds of: VERTICO The user must read these Instructions for Use before the first bed manipulation. The user is obligated to operate the bed according to these Instructions for Use. -
Page 6: Safety Instructions
Instructions for Use of VERTICO Bed AFETY NSTRUCTIONS Before using the bed, it is necessary to familiarize yourself with the Instructions for Use and carry out the operation only in accordance with them! The bed may only be operated by the persons who are familiar with the Instructions for Use in detail! The bed must not be used, if it is not in perfect condition, especially if there were found the defects that could harm a patient, operating personnel, the bed itself, etc.! -
Page 7: Conditions Of Use
Instructions for Use of VERTICO Bed ONDITIONS OF The bed may only be used in the interior with the ambient temperature ranging between +10°C and +40°C, the relative humidity between 30% and 75% and the atmospheric pressure between 700 hPa and 1060 hPa. -
Page 8: Bed Location
Instructions for Use of VERTICO Bed Parameters of electrical parts used on the bed, Onimed Operating voltage 230 V Supply frequency 50/60 Hz Maximum input 350 W Protection class Applied part B type Protection minimum IPS4 Motor load 10%, 2 min. max. load/18min. At rest... -
Page 9: Bed Description
Instructions for Use of VERTICO Bed ESCRIPTION 1) Universal accessory holder 9) Footboard 2) Headboard 10) Impact wheel 3) CPR – pulling pin 11) Angle gauge of the bearing area tilting 4) Mattress holder 12) Central brake control 5) Back part... -
Page 10: Installation And Commissioning Of The Bed
Instructions for Use of VERTICO Bed NSTALLATION AND OMMISSIONING OF THE This chapter lists the basic tasks that must be fully performed before the bed is put into operation for the first time! Consult Instructions for Use thoroughly. • •... -
Page 11: Relocation And Handling
Instructions for Use of VERTICO Bed ELOCATION AND ANDLING Before moving the bed itself, always adjust it to the basic position (i.e. all the adjustable parts are in the lowest possible position). Set the height of the bearing area to the optimum position, but always not more than 20 cm below the maximum reachable height. -
Page 12: Bed Operation
Instructions for Use of VERTICO Bed PERATION 10.1 E – G LECTRICAL ONTROL LEMENTS ENERAL PERATING NSTRUCTIONS The beds are equipped with reliable control units, controllers and motors that have low noise levels and do not place any demands on maintenance even after several years of operation. The bed may be equipped with multiple types of electronics based on the bed configuration. -
Page 13: Patient Hand Controller
Instructions for Use of VERTICO Bed 10.2 ATIENT ONTROLLER Before starting the first positioning, you are obliged to fully familiarize yourself with the general operating instructions of the electrical control elements in Chapter 10. The person not familiarized with the general operating instructions must not control the beds! The beds may be equipped with patient hand controllers. -
Page 14: 10.2.1 Function Lock Of The Patient Controller
Instructions for Use of VERTICO Bed 10.2.1 FUNCTION LOCK OF THE PATIENT CONTROLLER Individual functions of the patient controller can be locked. Locked function is indicated by changing the illumination from white to red for the given function. Lock the individual functions using the magnetic wrench as follows: Activate the controller using the GO button (1) •... -
Page 15: Clamp For Electrical Potential Balancing
Instructions for Use of VERTICO Bed 10.4 LAMP FOR LECTRICAL OTENTIAL ALANCING The bed may be equipped with a terminal for balancing the electrical potential (1) which is located in the head section of the bed frame. Use the clamp when connecting the bed to the medical isolated system, where it serves as a grounding system, or when scanning electrical potentials, it is used to balance the potentials between the patient and the device. -
Page 16: Positioning Of The Calf Part
Instructions for Use of VERTICO Bed 11.2 P OSITIONING OF THE You can set the calf part to several pre-set positions using the adjusting comb. Set the calf part as follows: Adjust the calf part position only when the thigh part is slightly lifted. -
Page 17: Headboard, Footboard And Siderails
Instructions for Use of VERTICO Bed EADBOARD OOTBOARD AND IDERAILS 12.1 R EMOVABLE ILTABLE IDERAILS The bed may be equipped with removable tiltable siderails. The tilting mechanism of the siderails is used to tilt the siderail along the bed bearing area. -
Page 18: Removable Headboard
Instructions for Use of VERTICO Bed 12.2 R EMOVABLE EADBOARD The hospital version of the bed is provided with a removable headboard with arresting against accidental removal. To remove the headboard observe the following instructions: Unlock the green arresting levers of the board (1) upwards •... -
Page 19: Impact Wheels
Overloading or improper use could result in damage! The holders are intended exclusively for use with original accessories of PROMA REHA, s.r.o. If the accessories other than original ones are used, the bed manufacturer does not answer for any damage! -
Page 20: Stacking Rack For Bedding
Instructions for Use of VERTICO Bed 12.5.1 STACKING RACK FOR BEDDING The bed may be equipped with an extension rack for bedding located under the calf part of the bearing area. To use it, follow the steps below: Level the bed to the horizontal position (the bedding rack cannot be used in •... -
Page 21: Accessories
Instructions for Use of VERTICO Bed CCESSORIES 13.1 F IXING AFETY ELTS Due to the patient’s safety the bed is provided with a set of seat belts used during the verticalization. The safety belts are attached to the holders placed along the bearing surface by velcro closure. -
Page 22: Trapeze Bar With A Small Bar
This infusion stand is only intended for the beds made by PROMA REHA, s.r.o.! It is designed for use in the interior and its maximum load is 12 kg, the maximum load per a hook is 3 kg! -
Page 23: Problems And Troubleshooting
Instructions for Use of VERTICO Bed ROBLEMS AND ROUBLESHOOTING 14.1 T HE BUTTONS ON THE ATIENT ONTROLLER ARE LASHING If the buttons on the patient hand controller are flashing, the lock mode is activated. To use the standard control, remove the universal plastic key from the controller, see chapter 10.3.1. -
Page 24: Error Message - The Diodes Flash On The Controller
Instructions for Use of VERTICO Bed 14.4 E – RROR ESSAGE THE DIODES FLASH ON THE CONTROLLER The bed is provided with electronics of own diagnostics. Use a light code to determine an error and use the Instructions for Use to try to remove it. -
Page 25: Irc Sensor Error
Instructions for Use of VERTICO Bed 14.4.3 IRC SENSOR ERROR 1) Stop positioning 2) Press the GO button to deactivate signalling Further positioning of the bearing area lift, including special positions is PROHIBITED. Positioning of the individual parts of the bearing area (bases) is not limited. -
Page 26: Storage
Instructions for Use of VERTICO Bed Regular maintenance and cleaning work should be carried out according to the following table: Bed part Material Daily cleaning cleaning and Full cleaning and and disinfection disinfection when disinfection patients are changing Headboard and footboard, plastic HB-01... -
Page 27: Maintenance And Service
Instructions for Use of VERTICO Bed AINTENANCE AND ERVICE As a result of disinfection and cleaning, contact surfaces may become clogged mainly in the joint connections of the bed. It is therefore necessary to check and maintain the individual parts of the bed at regular intervals: Every 3 months •... -
Page 28: Product Disposal
Instructions for Use of VERTICO Bed RODUCT ISPOSAL The product is made of materials that are environmentally friendly. It does not contain any hazardous substances and its operational noise meets all the requirements of public health regulations against adverse effects of noise and vibrations in protected interior areas of buildings. -
Page 29: Abbreviations, Signs And Symbols Used
Instructions for Use of VERTICO Bed BBREVIATIONS IGNS AND YMBOLS The beds are marked according to the risk analysis and as given in the above-mentioned safety warnings and descriptions with informative safety pictograms. These pictograms draw attention to important places on the bed or places with increased risk. -
Page 30: List Of Supported Accessories
ONTENTS 1 x Bed as specified in delivery note 1 x Instructions for Use ONTACT PROMA REHA, s.r.o., Riegrova 342, CZ-55203 Česká Skalice phone: +420 491 11 22 33, fax: +420 491 54 11 85 info@promareha.cz, www.promareha.cz Company ID: 63219107; Tax ID: CZ63219107, registered in the Commercial Register: held with the Regional Court in Hradec Králové, section C, entry 7945... - Page 31 Instructions for Use of VERTICO Bed Page 31/32...
- Page 32 PROMA REHA, s.r.o., Riegrova 342, CZ-55203 Česká Skalice Company ID: 63219107; Tax ID: CZ63219107, registered in the Commercial Register: held with the Regional Court in Hradec Králové, section C, entry 7945 phone: +420 491 11 22 33, fax: +420 491 54 11 85 info@promareha.cz...