Infinite Peripherals Linea SCP7520 User Manual page 15

Scanning Barocdes
Scanning 2D Barcodes:
To scan a 2D barcode, activate the scanner then position the read head
so that the scan line is above the barcode and crosses both ends as
shown in the figure below. Slowly move the scan line over the barcode
from top-to-bottom until the barcode has been read by the scanner.
Scan button
User Notes:
To use the barcode reader feature, special software must be used to
read and process the information. Please consult your reseller if this
software is available or contact Infinite Peripherals for recommendations
on compatible third party software solutions.
Infinite Peripherals, Inc.
www.ipcprint.com
Linēa User Manual v1.04
Scan direction
Figure 9
. . . . . . . . . . . . . . . . . . . .
Page 15