Elevator Assembly - Spacerails Level 8 Instruction Booklet

ELEVATOR ASSEMBLY

Illustrations are approximately 33% of actual size.
Step 1: Place a 600 mm shaft in
the white hole on the Power Box.
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
NOTE:
Install the first
Elevator Helix
piece male side up
and rotate it until
it slides in place
and engages with
driver at the base
of Power Box.
Step 2: Connect Elevator Helix
pieces together with the male part
facing up to fill the shaft.
Step 3: Once the corkscrew is
built, attach three support shafts
to the Power Box.
Page 9