Advertisement
B
INSTALLING RAILS
Connecting rails to arms: To install the rails, press them into the arm as
shown. You should hear a click when the rail is locked in place.
Attach Rail Clips every 8-10 cm along rail
to maintain stability and keep rails parallel.
Keeping rails uniform maintains speed and
avoids throwing the Marble off course.
Rails should extend into the elevator
enough to catch the Marble.
Keep incline as smooth as possible to avoid
losing speed or contact with rails.
Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
When building a curved Rail Clips and Arm Clips
can be adjusted to create a banked curve. Plenty
of Rail Clips are included so that they can be
applied liberally.
Rail Couplings are provided but not needed. If
more length is needed for a rail, insert the coupling
into the end of both rails being joined.
Page 13
Advertisement
