Subscribe to Our Youtube Channel
Related Manuals for Glow Bricks Lego Santa's Visit 10293
Summary of Contents for Glow Bricks Lego Santa's Visit 10293
- Page 2 Take the shown lighting parts for the extrance...
- Page 3 Remove the 1x6 plates from both sides, replace by the lighting parts by the exact direction For the remain light, put it inside the clear round brick...
- Page 4 This part is done Then assemble the lights for the tree...
- Page 5 Start from the light bulb at the end, put it inside the cone Restore the green cone, assemble the orange lighting round plate to the orange round plate at the middle...
- Page 6 Keep assemble the lighting round plates by following the color The tree lights is done...
- Page 7 Now it’s turn for the house, get the remain lighting parts be ready Start from the front door, remove the lamps and their tops, take the lights from 1x4 blue at the end...
- Page 8 Put the bulbs inside the clear round bricks Then restore the lamps and assemble the 1x4 lighting plate as shown...
- Page 9 Then pull the remain lights through the door There’re 2 lighting fires are separated, assemble them on the table first...
- Page 10 For the 1x6 lighting tan plate next to the connector, move it to the certain area and assemble it on the ceiling...
- Page 11 Assemble the black lighting plates and the clear round plate as shown For the clear round plates next to it, assemble 2 of them on the chimney The rest 3 will be assembled on the tree...
- Page 12 Replace the fire by the lighting fires, the wires can be covered by the picture The remain lights will be assembled to the top...
- Page 13 Assemble the grey 1x2 plates on both side and replace the lighting fire at the front At last, connect all three connectors to the USB cable...
Need help?
Do you have a question about the Lego Santa's Visit 10293 and is the answer not in the manual?
Questions and answers