Advertisement
Quick Links
Advertisement
Related Manuals for Glow Bricks Book Shop Lego 10270
Summary of Contents for Glow Bricks Book Shop Lego 10270
- Page 1 Book Shop...
- Page 2 These lighting parts are going to be used for the blue building First we separate the blue building...
- Page 3 Take the lamp of the top floor, replace the yellow cone to the lighting part shown Then install the green and grey plates as shown...
- Page 4 Then install the white plates to the bottom Take the lighting part of single 1x4 white plate to install on the other side then connect them...
- Page 5 Take this lighting part for the 2 floor Before installing the lights, take the parts from the building as shown Take the clear bricks away from the lamp and replace with the lighting part...
- Page 6 Put the lamps back and restore the building Then install the green 1x4 plate and the fire...
- Page 7 Connect to the top floor (the other plug connect with the other side of the top Connect the plug to the USB cable with the lighting lamp post...
- Page 8 Now it’s turn for the red building, take the following part for the top floor Install the lights as shown...
- Page 9 Pull the remain lights to the bottom then install as shown Take this lighting part for the 2 floor...
- Page 10 Install the lights to the bottom first Put the remain clear lighting part to the lamp to install as shown...
- Page 11 Pull the plug to the stairs to connect with the top floor Split the parts away from the ground floor as shown...
- Page 12 Remove 4 pieces of 1x2 white plates away and install the lighting parts Then put them back to the building...
- Page 13 Pull the 1x4 brown plate to the back and install it here Then pull the USB port out of the building as shown...
- Page 14 Stabilize the connector to the corner then restore the stairs Pull the yellow lighting round brick to the front, remove some tiles from the front and install it...
- Page 15 Then restore the tiles Connect the plug with the 2nd floor...
- Page 16 Then install the tree lights The 3 lights which are next to the connector must be installed at the leaves facing outside...
- Page 17 Then install the remain lights, put the tree on, connect to the USB port and the buildings and light it on~...
Need help?
Do you have a question about the Book Shop Lego 10270 and is the answer not in the manual?
Questions and answers