Page 2
Firstly, remove the front cover and the dark blue parts...
Page 3
Get the lighting set and find the light blue lighting parts at the end Replace the removed blue parts by the lighting parts mentioned on the previous step...
Page 4
Before restoring the front cover, move the remain lighting parts to the interior of the car by the gap beside the wheel Stick the white lighting tile at the shown place...
Page 5
Get the remain lights to the back, remove the light grey tile and replace by the lighting tile Then assemble the three red lights to the certain spots...
Page 6
Organize the wires at the back then you can put the engine cover back on To power by the battery, get the connector to connect with the battery case...
Page 7
Then settle the case on the driver seat To power by USB, get the plug to the back of other seat, then get the connect through the bottom of the car to connect the plug...
Need help?
Do you have a question about the Ford GT and is the answer not in the manual?
Questions and answers