Subscribe to Our Youtube Channel
Related Manuals for Glow Bricks Land Rover Defender Lego 42110
Summary of Contents for Glow Bricks Land Rover Defender Lego 42110
- Page 2 Start with the rear light part first Take the red square plates with white round plate away...
- Page 3 Install the black round plate lighting part as shown Hide the wires connecting the black round plate underneath the grey part Install the red lighting parts...
- Page 4 For the other side of the light with connector plug, remove the parts shown in purpose to pull the wires to the front Install the lighting parts and adjust the wire to the front...
- Page 5 Restore the green parts after the wires moved under the driver’s seat Now it’s turn for the interior lights...
- Page 6 The white plate lighting part should be installed on rear seats side and black lighting parts on front seats side...
- Page 7 Adjust the connectors of 2 previous parts together You need to move both of the connector plugs to the engine area, and there’s a hole in the red circle below to get them through...
- Page 8 Get the plugs on engine then we can go to the next step Take the front lights away, separate the black dishes to assemble with the lighting part...
- Page 9 The lighting black round plate will be installed on the side of the vehicle Remove the green parts as shown to move the front lights to the front...
- Page 10 Adjust the wires to the front and remember don’t let them stuck to the wheel to interrupt when they’re spinning Now you can install the front lights...
- Page 11 Restore the green part after the light is installed Repeat the previous step on the other side...
- Page 12 Now you can connect to the power, you can choose either battery case or USB cable Can put the battery case as shown This is how to connect by USB cable...
Need help?
Do you have a question about the Land Rover Defender Lego 42110 and is the answer not in the manual?
Questions and answers