Chapter 4 - Measuring Capability; Real-Time Based Electrical Parameters - Veesta World V-PM2000 Series User Manual

VP-2040 Enhanced IED
V-PM2000 Series, Veesta Power Measurement
Instructions & User's Manual
Chapter 4 -
4.1

Real-time based Electrical Parameters

All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
Measuring Capability
The VP-2040 provides voltage, current, power, and frequency etc.
basic parameters. The following data are effective real values, and
the refresh rate is 1 second.
Table 4-1: VP-2040 Electrical Parameters
Real-time Measuring
Current
Each Phase
Zero sequence
Degree of unbalance (%)
Voltage
Line - Line
Line - Neutral line
Degree of unbalance (%)
Active Power / Reactive Power / Apparent Power
Single Phase
Total
Power Factor
Single Phase
Total
Other Measuring
Frequency

Chapter 4 - Measuring Capability

Measuring Range
0 – 50,000 A
0 – 50,000 A
0 – 100%
0 – 500 kV
0 – 500 kV
0 – 100%
0 - ± 100 MW / Var / VA
0 - ± 100 MW / Var / VA
-1.000 – +1.000
-1.000 – +1.000
35 – 65 Hz
Page 22 of 100