Data Logger Feature; Standards - Veesta World V-PM2000 Series User Manual

VP-2040 Enhanced IED
V-PM2000 Series, Veesta Power Measurement
Instructions & User's Manual
3.1.7

Data Logger Feature

1. Event Logger
2. Control Output
3. Max / Min Logger
4. Demand / Max Logger
3.1.8

Standards

1. Metering
2. Dielectric Strength
3. Impulse & Surge Test
(EMC)
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
: 50 events with time-stamped in NVRAM
Status change of switch input
Activation of set-points
Alarms Operation of controlled relay output
: 2 assignable relay outputs
: 12 parameters without time-stamped A1, A2, A3,
W, Var, VA, Voltage V1,V2,V3 THD, Current
A1,A2,A3 THD
: 4 parameters with time-stamped AE, W, Var, VA
: Class 1 For:
Electricity Metering Part 21 Active Energy
Electricity Metering Part 21 Reactive Energy
: 2KV ACrms 1 minute
Insulation resistance ≥50MΩ
: Electrostatic discharge immunity test
Radiated immunity test
Electrical fast transient/burst immunity test
Surge immunity test (1, 2/50μs~8/20μs)
Conducted emissions
Radiated emissions
Chapter 3 - Specifications
IEC 62053-21
IEC 62053-23
IEC 255-5
IEC 61000-4-2,Level 4
IEC 61000-4-3,Level 3
IEC 61000-4-4,Level 4
IEC 61000-4-5,Level 3
EN 55022,Class B
EN 55022,Class B
Page 20 of 100