Table of Contents
Advertisement
VP-2040 Enhanced IED
V-PM2000 Series, Veesta Power Measurement
Instructions & User's Manual
1.5.2
Event Logger
1.6
VP-2040 IED Software Tools program
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
harmonic spectrum are useful and available with the power analysis
option.
Alarms, set-point triggers, input and output events can be stored in a
50 event record and time / date stamped by the internal clock. This is
use full for diagnosing problems and system activity. Minimum and
maximum values are also continuously up dated.
The VP-2040 IED Tool is PC program in Windows based program for
the VP-2040. It can be used to enter set-points, read metered values,
monitor status and evaluate power quality. All data continuously
gathered by the VP-2040 can be transferred to a third party software
program for display, control or analysis via the communications
interface.
Once all set-points have been entered they can be downloaded into
any VP-2040 or stored in a file with a tag name for later reference.
Screens are available for monitoring all measured values such as
current, voltage or power. Status of alarms and control settings can
also be displayed.
Harmonic analysis may reveal excessive harmonic content requiring
a dreaded transformer or larger neutral wire. Early warning of these
problems can prevent equipment damage or nuisance breaker
tripping.
Chapter 1 - Introduction
Page 15 of 100
Advertisement
Table of Contents
