Otto Bock FTC Series Instructions For Use Manual page 7

NOTICE
Grinding the footshell
Premature wear resulting from damage to the footshell
► Do not grind the footshell.
► Inform the patient.
5.1 Applying/removing the footshell
Putting on the footshell
> Recommended tools: ACC-00-10300-00 tool for changing the
footshell
1) For feet with separate sole plate: Insert the sole plate into the
footshell. The sole plate is covered by a protective sock.
2) Pull a protective sock over the prosthetic foot.
3) Slide the prosthetic foot into the footshell.
4) Press the heel of the prosthetic foot into the footshell until it
engages.
Removing the footshell
> Recommended tools: ACC-00-10300-00 tool for changing the
footshell
1) Push the fixing of the footshell to the rear and pull up the heel of
the prosthetic foot.
2) Remove the prosthetic foot from the footshell.
3) For feet with separate sole plate: Take the sole plate out of the
footshell.
6 Use
CAUTION
Use of the product without shoes
Risk of injury due to slipping on slippery surfaces
► Do not use the product on slippery surfaces.
6.1 Cleaning
CAUTION
Use of unsuitable cleaning agents or disinfectants
Impairment of functionality and damage due to incorrect cleaning
agents or disinfectants
► Only clean the product with the approved cleaning agents.
► Only disinfect the product with the approved disinfectants.
► Observe the instructions for cleaning and care.
► Clean the footshell as described in the prosthetic foot instructions
for use.
7 Disposal
In some jurisdictions it is not permissible to dispose of the product
with unsorted household waste. Improper disposal can be harmful to
health and the environment. Observe the information provided by the
responsible authorities in your country regarding return, collection
and disposal procedures.
8 Legal information
All legal conditions are subject to the respective national laws of the
country of use and may vary accordingly.
8.1 Liability
The manufacturer will only assume liability if the product is used in
accordance with the descriptions and instructions provided in this
document. The manufacturer will not assume liability for damage
caused by disregarding the information in this document, particularly
due to improper use or unauthorised modification of the product.
8.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on
medical devices. The CE declaration of conformity can be down­
loaded from the manufacturer's website.
7