Citizen iDP3420 User Manual
  1. Manuals
  2. Brands
  3. Citizen Manuals
  4. Printer
  5. iDP-3420
  6. User manual
Citizen iDP3420 User Manual

Citizen iDP3420 User Manual

Citizen systems printer user's manual
Hide thumbs Also See for iDP3420:
Table of Contents

Advertisement

Quick Links

DOT MATRIX PRINTER
MODEL iDP3420
iDP3421
iDP3423
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iDP3420 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Citizen iDP3420

Summary of Contents for Citizen iDP3420

  • Page 1 DOT MATRIX PRINTER MODEL iDP3420 iDP3421 iDP3423 User’s Manual...

  • Page 3: Declaration Of Conformity

    CITIZEN es una marca registrada de CITIZEN WATCH CO., LTD., Japón ESC/POS and EPSON are a trademark and registered trademark of SEIKO EPSON CORPORATION Star is a registered trademark of Star Micronics Corporation Windows is a registered trademark of Microsoft Corporation iDP3420/3421/3423 User’s Manual Class A CITIZEN...

  • Page 4: Important Safety Instructions

    Do not use liquid or aerosol cleaners. The product may fall, causing serious Do not place this product where the cord will be Putting it on may cause suffocation. iDP3420/3421/3423 User’s Manual To ensure reliable This product should not be If you...

  • Page 5: Wichtige Sicherheitsanweisungen

    Bitte halten Sie den Kunststoffbeutel, in den die Ware verpackt ist, von Kindern entfernt, oder werfen Sie ihn weg, damit er nicht in die Hande von Kindern gerät. Ersticken führen. iDP3420/3421/3423 User’s Manual Keine Flüssigkeiten oder Aerosolreiniger benutzen. Drucker nicht in der Nähe eines Kabel muß...
  • Page 6 User’s Manual This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 off FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
  • Page 7 9. Please note that, notwithstanding Item 8 above, we will not be responsible for any effects resulting from operation of the equipment. <CAUTIONS> iDP3420/3421/3423 User’s Manual Please keep it handy for reference Please note that CITIZEN...
  • Page 8 This is an illustration mark used to indicate such information as an instruction or the like. Negligence of this precaution may result in death or serious injury. Negligence of this precaution may result in injury or damage to property. iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 9 User’s Manual WARNING Never handle the equipment in the following manners, as it may break, become out of ord er, or overheat causing smoke and resulting in fire or electric shock. If the equipment is used in an abnormal condition, such as when broken, then problems, smoke emission, abnormal odor/noise, and fire can result.

  • Page 10: Precautions For Installation

    User’s Manual PRECAUTIONS FOR INSTALLATION Do not use or store the equipment in a place exposed to fire, moisture, or direct sunlight, or in a place near a heater or a thermal device where the prescribed operating temperature and humidity are not met, or in a place exposed to much oil, iron powder, or dust.

  • Page 11: Precautions For Handling

    When opening/closing the cover, and so on, be careful not to catch your hand or finger on the equipment. When opening/closing the printer cover, take care that the paper will Do not disassemble the equipment on iDP3420/3421/3423 User’s Manual...

  • Page 12: Daily Maintenance

    User’s Manual DAILY MAINTENANCE Prior to starting maintenance work, be sure to turn off the main body. Use a dry soft cloth to wipe off stains and dust from the surfaces of the main body case. For severe soiling, dip the cloth in water and wring it, for wiping off the soil. Never use org anic solvents, such as alcohol, thinner, trichlene, benzene, ketone, or chemical dusters.

  • Page 13: Table Of Contents

    Connecting Drawer Kick-Out Connector ...11 Opening/Closing the Auto Cutter (iDP3421/3423)...11 Setting the Cassette Ribbon ...12 Inserting the Paper ...13 4.7.1 Inserting the Paper (iDP3420/3421) ...13 4.7.2 Inserting the Paper Roll (Duplicable 2-sheet Paper)(iDP3423)...15 4.7.3 Removing the Wound Paper Roll(iDP3423) ...16 Adjusting the Paper Near End Sensor ...16...
  • Page 14 10. SERIAL INTERFACE ... 31 10.1 Specifications ...31 10.2 Connector's Pin Configuration...32 10.3 Input and Output Signals...33 10.3.1 Input and Output Signals ...33 10.3.2 Data Configuration...35 10.3.3 Error Detection...36 10.3.4 Data Receiving Control ...36 10.3.5 Buffering...36 10.3.6 Electrical Characteristics ...37 iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 15 14.14 Windows Codepage ...125 14.15 International Character Codes Table ...126 APPENDIX 1. BLOCK DIAGRAM ... 127 APPENDIX 2. OUTLINE DRAWING for iDP3420 ... 128 APPENDIX 3. OUTLINE DRAWING for iDP3421 ... 129 APPENDIX 4. OUTLINE DRAWING for iDP3423 ... 130 iDP3420/3421/3423 User’s Manual...
  • Page 16 Anschluß des Schubladenausschubsteckers ...141 Öffnen/Schließen des automatischen Schneidemechanismus ...141 Einlegen der Farbbandkassette...142 Einlegen des Papiers ...143 4.7.1 Das Papier (iDP3420/3421) einlegen...143 4.7.2 Einlegen der Papierrolle (doppellagiges Durchschlagpapier) (iDP3423) ...145 4.7.3 Herausnehmen der vollen Papierrolle (iDP3423) ...146 Ausrichten des Papierrestsensors ...146 Herausnehmen der Restpapierrolle ...147...

  • Page 17: Outline

    Fastener CAUTION : Install the printer on a flat and stable desk. Do not install the printer near a heater or in a place exposed to direct sunlight. Do not use the printer in a high-temperature, high-humidity, and contaminated environment.

  • Page 18: Basic Specifications

    BASIC SPECIFICATIONS Model Classifications The printer model is classified by the following designation method. iDP3420 Supply Voltage 120: For 120 V AC 230: For 230 V AC Character Set F: International Interface CBM Mode R: Serial (RS-232C) P: Parallel (CENTRONICS Compliant)

  • Page 19: Basic Specifications

    Provided by operating the on-line, self-test, hex. dump print function power switches and LF switch 6 KB or 256 bytes (Selectable with the DIP switch) Within 24 hours (After 10 minutes or more of printer operation) 2-drawer, 1-drawer switch Automatically feeds the paper by several lines when it is inserted.

  • Page 20: Paper Specifications

    Roll diameter Core 2.3.2 Printing Position 2.3.3 Cutter Layout iDP3420 tear bar position iDP3421/3423 auto cutter cutting position : Normal paper and non-carbon paper : 76 +/- 0.5 mm : Single-sheet paper --- 45 to 55 kg/1,000 sheets/1,091 Copying paper --- Non-carbon paper, 1 original + 1 copy, Total thickness 0.2 mm or less...

  • Page 21: Outer Appearance And Component Parts

    User’s Manual OUTER APPEARANCE AND COMPONENT PARTS iDP3420 POWER Lamp ERROR Lamp FEED Switch Power Switch Top Cover Grounding Terminal Power Connector Drawer Kick-Out Connector Interface Connector CITIZEN...

  • Page 22: Idp3421

    User’s Manual iDP3421 POWER Lamp ERROR Lamp FEED Switch Power Switch Top Cover Grounding Terminal Power Connector Drawer Kick-Out Connector Interface Connector CITIZEN...

  • Page 23: Idp3423

    User’s Manual iDP3423 POWER Lamp ERROR Lamp FEED Switch Power Switch Top Cover Grounding Terminal Power Connector Drawer Kick-Out Connector Interface Connector CITIZEN...

  • Page 24: Operation

    If lightning has occurred in the nearby area, disconnect the power cord from the plug socket and refrain from using the printer. electric shock. When the printer is not used for a long period of time, be sure to disconnect the power cord from the plug socket for safety. Power Cord iDP3420/3421/3423 User’s Manual...

  • Page 25: Connecting The Interface Cable

    3. Secure the cable terminals. Serial interface Parallel interface 4. Connect the interface cable to the computer. Serial Interface Cable : Tighten screws to secure. : Turn clamps to secure. Serial Interface Connector Clamp Parallel Interface iDP3420/3421/3423 User’s Manual Parallel Interface Connector CITIZEN...

  • Page 26: Attaching The Ferrite Core To The Interface Cable

    4. Secure the arm of the ferrite core onto the cable with a fastener so that the ferrite core will not move. Cut off the surplus part of the fastener. iDP3420/3421/3423 User’s Manual Ferrite Core Ferrite Core Interface Cable Within 5 cm...

  • Page 27: Connecting Drawer Kick-Out Connector

    2. Check the top and bottom of the drawer kick-out cable connector and connect it to the drawer kick-out connector located on the back of the printer. 3. Screw the grounding cable of the drawer to the grounding terminal of the printer. CAUTION: Connect only the prescribed drawer (Solenoid) to the drawer kick -out connector.

  • Page 28: Setting The Cassette Ribbon

    (6) To remove the cassette ribbon, lift it while tilting the locking claws on both sides toward the inside. (7) Close the auto cutter. (iDP3421/3423) CAUTION: When closing the auto cutter, do so gently not to give a shock. Head Cover Platen Ribbon iDP3420/3421/3423 User’s Manual Cassette Ribbon Knob Locking Claw CITIZEN...

  • Page 29: Inserting The Paper

    4.7.1 Inserting the Paper (iDP3420/3421) (1) Put your hands in the concave parts on both sides of the printer cover, and open it until it comes to a stop. (2) Cut the end of the paper roll at close to a right angle.
  • Page 30 User’s Manual Paper Roll Setting Direction CITIZEN...

  • Page 31: Inserting The Paper Roll (Duplicable 2-Sheet Paper)(Idp3423)

    When closing the auto cutter, do so gently not to give a shock. Winding Reel Winding Direction Paper Path (Duplicable 2-sheet Paper) Illustration Drawing It could cause a paper jam. Journal Paper Paper Roll (Duplicable 2-sheet Paper) iDP3420/3421/3423 User’s Manual Auto Cutter Receipt Paper Printer Mechanism CITIZEN...

  • Page 32: Removing The Wound Paper Roll(Idp3423)

    Paper Roll (Receipt Paper) Paper Roll Remaining Paper Roll Remaining Diameter Approx. 21 mm Approx. 23 mm Approx. 25 mm Sensor Fixing Screw iDP3420/3421/3423 User’s Manual Amount Approx. 1.2 m Approx. 2.2 m Approx. 3.2 m Remaining Amount Marks CITIZEN...

  • Page 33: How To Remove Remaining Paper Roll

    (4) Eliminate completely the paper remaining in the paper route. CAUTION : When pulling out the paper (Forward/Reverse direction), be sure to operate the paper-free lever. iDP3420/3421/3423 User’s Manual Paper-Free Lever The paper feed roller is disengaged, to free the paper,...

  • Page 34: Unlocking The Cutter(Idp3421/3423)

    CAUTION: When pulling out the paper(Forward/Reverse direction), be sure to operate the paper free lever. When closing the auto cutter, do so gently not to give a shock. Auto Cutter iDP3420/3421/3423 User’s Manual Emergency Knob CITIZEN...

  • Page 35: Operation Panel And Display Of Error

    (Twice a second) approx. 1 second. : If the printer mechanism has a greater load due to a paper jam, etc., the buzzer will sound and the ERROR lamp will blink to stop the printer mechanism. : If the paper has run out, the paper sensor in the paper path near the print head will detect the end of the paper roll, turn on the buzzer, and illuminate the ERROR lamp to stop the printer mechanism.

  • Page 36: Operation Flow At Power-On

    Yes(FEED SW) and Enlarged Red Print Test Print Dump Mode Buffer Data Prints "Power Down(Data in Buffer)" in Red, Followed by Buffer Contents. Waits for Data Input iDP3420/3421/3423 User’s Manual 1 Sec. Passed FEED SW ? (AGAIN) Input Buffer Clear CITIZEN...

  • Page 37: Dip Switch Setting

    3. If the paper roll has been set, remove it from the paper holder. 4. Detach the DIP switch cover. (Only DS1 is available for the parallel interface) The DIP switch can be found at the location shown in the figure below. DIP Switch Cover iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 38: Dip Switches Setting

    6K bytes See the table below Character Code Selection DS1-3 DS1-4 Operation Mode ESC/POS Ignored Star Star Auto cut iDP3420/3421/3423 User’s Manual Upon Shipment from Factory ON *1 ON *2 ON *2 ON *2 256 bytes OFF *3 OFF *3 ESC/POS...
  • Page 39 2-ply paper is not available for the 1-ply setting. paper is used for the 2-ply setting. 8 bits 7 bits Even DTR/DSR XON/XOFF See the table below DS2-6 DS2-7 iDP3420/3421/3423 User’s Manual Factory Setting The same applies to when 1-ply CITIZEN...

  • Page 40: Preset Jumper Setting

    2-C * = 2-C or open The preset jumper is located as shown in the figure below. Parallel Interface Star 1-C * 2-C * Star 1-C * iDP3420/3421/3423 User’s Manual ESC/POS 1-C * 1-C * 1-C * 2-C * ESC/POS 2-C *...

  • Page 41: Mode Setting Method

    MODE SETTING METHOD This printer has the CBM, Star, and ESC/POS mode. your need. (1) Setting method See 5. DIP SWITCH SETTING. Seeing the settings of the DIP switch segments 1-9 and 1-10 and those of the preset jumper, set each mode.

  • Page 42: Input Buffer Backup Function

    Even if the power is turned off or fails during the printing process, the data in the input buffer will be saved. If the power is turned on again, the printer will print a power failure mark, "==POWER DOWN==," in red and reprints the data from the beginning of the line where it left off.

  • Page 43: Parallel Interface

    : 8-bit parallel system (DATA1 to DATA8) : ACK, BUSY, STB, FAULT, SELECT, RESET, COMPULSION : Printer side --- 57LE-40360 (Equivalent to anphenol), Cable side --- 57-30360 (Ditto) Mode Star ESC/POS iDP3420/3421/3423 User’s Manual Star TWISTED PAIR GND RESET FAULT COMPULSION ESC/POS CITIZEN...

  • Page 44: Input And Output Signals

    : A signal turned to "LOW" when the printer has an alarm. SELECT : A signal to show whether the printer is s elected (On-line) or deselected. COMPULSION : A signal to show the status of the drawer switch. (Positive logic) : A signal to show that the paper has run out.

  • Page 45: Electrical Characteristics

    (3) Input and output conditions All the input signals are pulled up at 3.3 k . [Printer Side] All the output signals are pulled up at 3.3k . [Printer Side] iDP3420/3421/3423 User’s Manual [Host Side] Twisted Pair Wire [Host Side] Twisted Pair Wire...

  • Page 46: Timing Chart

    Timing Chart (1) Data input and printing timing 9.3.4 Data Receiving Control When the BUSY signal is at "LOW," the printer can receive the data from the host, but when at "HIGH," it cannot. iDP3420/3421/3423 User’s Manual T1, T2, T3 : 0.5 s MIN...

  • Page 47: Serial Interface

    = Logic "1" (-3 V to -12 V) Space = Logic "0" (+3 V to +12 V) (5) Received data (RXD signal) RS-232C Mark Space (6) Reception control (DTR signal) RS-232C Mark : Data transfer disabled Space : Data transfer enabled Asynchronous iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 48: Connector's Pin Configuration

    PE (HI-LEVEL) Cautions: An RS-232C signal is based on the EIA RS-232C. When the data is not being transferred, the received data should be always maintained as a mark. Star FAULT FAULT mTXD mRXD RESET iDP3420/3421/3423 User’s Manual ECS/POS CITIZEN...

  • Page 49: Input And Output Signals

    DIP switches. (4) DSR When this signal is a space, the data is sent from the printer side. when a request to send command is executed, the printer will wait until the signal becomes a space. (5) FAULT CBM mode When this signal is Space, a mechanical error has occurred.
  • Page 50 (7) RTS This signal is turned to Space when the printer is turned on. (8) RCH When the printer is ready to receive, this signal is turned to Space. DTR. (9) mTXD TXD signal for the diode gate. (10) mRXD RXD signal for the diode gate.

  • Page 51: Data Configuration

    (3) Stop Bit (1 or More) If it is a mark, it is assumed neither the start bit nor an error, and it is iDP3420/3421/3423 User’s Manual A sequence of the bits are named Bit 0, Bit 1, ..., If a space is detected in detecting the stop bit, a...

  • Page 52: Error Detection

    10.3.5 Buffering The DTR and TXD signals are available as control signals to transfer the data to the input buffer. iDP3420/3421/3423 User’s Manual When an error is detected, that data is That data is stored in the buffer...

  • Page 53: Electrical Characteristics

    : A signal to show that the paper has run out. to the "HIGH" level when the paper has run out. : Signal ground : Frame ground iDP3420/3421/3423 User’s Manual [Host Side] Mark=(-8V) : Stop bit Space=(+8V): Start bit Mark=(-8V): 1 Space=(+8V): 0 Normal at the "LOW"...

  • Page 54: Drawer Kick-Out Connector

    A solenoid used for the drawer should be of 36 or more. kept below 0.8 A. Use beyond this limit cannot be assured. This connector cannot be connected to a telephone line. the solenoid. iDP3420/3421/3423 User’s Manual An output current should be Do not connect other than CITIZEN...

  • Page 55: Maintenance And Service

    User’s Manual 12. MAINTENANCE AND SERVICE For the information on maintenance and service, please contact our dealer. CITIZEN...

  • Page 56: Print Control Functions

    Setting the print lines after paper near end detection Deleting the download character, message, bit image Defining the download, bit image Printing the download, bit image iDP3420/3421/3423 User’s Manual Code Page 0CH n 1BH 2AH n1 n2 1BH 2DH n...

  • Page 57: Description Of Items

    Describes an argument value (Setting range) for the command. [Outline] Describes a command function. [Caution] Describes a caution as required. [Default] Describes an initial value for the command when accompanied by an argument. Shows a command. iDP3420/3421/3423 User’s Manual [ ]k means a repeat count of CITIZEN...
  • Page 58 Setting n = 0 does not feed the paper. iDP3420/3421/3423 User’s Manual You can set n = 1 to 127 lines. Note that the double width...
  • Page 59 This command prints the data. will print the data in the print buffer and feed the paper by one line. the printer will print the data in the print buffer and will not feed the paper. iDP3420/3421/3423 User’s Manual If the DIP switch segments 1 to 6 are set to OFF, the printer...
  • Page 60 Specifying/Canceling the inverted character [Code] <12>H [Outline] This command selects/deselects the inverted characters. beginning of one line. be mixed in one line. Otherwise, it is overridden. Erect and inverted characters cannot iDP3420/3421/3423 User’s Manual Enter this command at the CITIZEN...
  • Page 61 [Code] <13>H [Outline] This command specifies red-color characters. red by prefixing the print data with this command and sending it to the printer. want to use red characters, use this command for each line. [Function] Canceling the print data [Code] <18>H...
  • Page 62 = 0. [Default] n = 0 Normal data processing is restored after bit image printing. The underline is selected at n = 1 and iDP3420/3421/3423 User’s Manual Divide the number of dots printed by Therefore, the number of Printing is CITIZEN...
  • Page 63 <1B>H <33>H [Outline] This command sets the line feed width to 1/6 inch(Default). ESC "C" n [Function] Setting the page length [Code] <1B>H <43>H n [Range] 1 n 127 [Outline] Sets the 1-page length to n-lines. iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 64 This command cancels perforation skipping operation. ESC "f" 1 [Function] Form feed (Changing the page) [Code] <1B>H <66>H <01>H [Outline] This command searches for the beginning of the next page after printing the data in the print buffer. iDP3420/3421/3423 User’s Manual However, you CITIZEN...
  • Page 65 Character Code Table CBM International CBM Domestic Codepage PC850 (Multilingual) Codepage PC860 (Portuguese) Codepage PC863 (Canadan-French) Codepage PC865 (Nordic) iDP3420/3421/3423 User’s Manual Character Code Table Codepage PC852 (Eastern Europe) Codepage PC866 (Russian) Codepage PC857 (Turkish) Windows Codepage Space Page (For user setting)
  • Page 66 This command drives the drawer connector no. 2 pin under the condition set with the <ESC><BEL> n1 n2 command. buffer. n2 127 10 (ms) 10 (ms) This command is executed in order of entry into the input iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 67 As soon as this command is received, the drawer connector no. 5 pin is driven. power-on time is 200 ms ON and 200 ms OFF stationary. driven simultaneously. [Function] Buzzer-on [Code] <1E>H [Outline] This command emits a short warning sound from the printer. iDP3420/3421/3423 User’s Manual The drawers 1 and 2 cannot be CITIZEN...
  • Page 68 This command selects the international characters according to the value of n. [Default] Depends upon DIP switch setting. Character Set U.S.A. France Germany U.K. Denmark I Sweden iDP3420/3421/3423 User’s Manual (iDP3421/3423 only) (iDP3421/3423 only) Character Set Italy Spain Japan Norway Denmark II CITIZEN...
  • Page 69 (ESC DC2 n1 n2) is executed. m0 = 0 or m0 = 128 When defining only one character, set n1 = n2. iDP3420/3421/3423 User’s Manual n1 is a character code to start definition Once the download characters are CITIZEN...
  • Page 70 [Outline] This command selects/deselects the download character set. cannot be printed by simply defining them with the above-mentioned ESC & 0 command. To print them, send this command to the printer. ESC " " n "data" CR or LF [Function]...
  • Page 71 (Serial/Parallel) changes when the paper near end is detected. [Default] n = 0 If the value of n is specified beyond the range, the 2 lines since detection of the paper near end, resulting in the paper iDP3420/3421/3423 User’s Manual It stops The PE signal CITIZEN...
  • Page 72 Deletes all the data saved with the download function specified with n1. Deletes the data downloaded at the value specified with n2 (Value specified when saving with each download command), of the d ownload function specified with n1. iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 73 24 m denotes the number to be registered. d denotes the bit image data. iDP3420/3421/3423 User’s Manual 8 and that of vertical dots is represented by (See a download bit image Once the download bit image is defined, it...
  • Page 74 If the print buffer contains the data, this command will be ignored. been saved in the specified number, this command will be ignored. Nothing is printed when m is other than 0,1,2 or 3. iDP3420/3421/3423 User’s Manual If the bit image has not CITIZEN...

  • Page 75: Star Mode

    Specifying the 8-dot standard density bit image Specifying the 8-dot double density bit image Specifying/Canceling the double height character Defining the download character Specifying/Canceling the download character set iDP3420/3421/3423 User’s Manual Code Page 1BH 52H n 1BH 36H 1BH 37H...
  • Page 76 Deleting the download character, message bit 61 ESC DC2 n1 n2 image 62 GS n1 n2 Defining the download, bit image 63 GS m Printing the download, bit image iDP3420/3421/3423 User’s Manual Function Code Page 1BH 07H n1 n2 1BH 55H n 1BH 40H...
  • Page 77 Character Set U.S.A. France Germany U.K. Denmark I Sweden iDP3420/3421/3423 User’s Manual Character Set Italy Spain Japan Norway Denmark II Note that the double width CITIZEN...
  • Page 78 [Function] Canceling the highlight character [Code] <1B>H <46>H [Outline] This command deselects the highlight characters set with ESC "E". command will be printed in ordinary characters. iDP3420/3421/3423 User’s Manual The data following this The highlight The data following this CITIZEN...
  • Page 79 Canceling the red print [Code] <1B>H <35>H [Outline] This command deselects red print. iDP3420/3421/3423 User’s Manual The underline is selected at n = 1 and This command remains valid until the red Red and black characters cannot be mixed in one CITIZEN...
  • Page 80 Canceling the Inverted character [Code] <12>H [Outline] This command deselects the inverted characters. one line. iDP3420/3421/3423 User’s Manual Enter it at the beginning of one Erect and inverted characters cannot be mixed in one Enter this command at the beginning of CITIZEN...
  • Page 81 [Outline] This command prints the data. will print the data in the print buffer and feed the paper by one line. the printer will print the data in the print buffer and will not feed the paper. ESC "z" [Function]...
  • Page 82 [Range] 1 n 255 [Outline] Sets the 1-page length to n-lines. [Default] n = 42 If the print buffer contains the data, use of this command feeds the paper by iDP3420/3421/3423 User’s Manual You can set n = 1 CITIZEN...
  • Page 83 User’s Manual If the current position is equal to or greater than the It cannot be fed unless the...
  • Page 84 This command sets the n-line lower margin. [Default] n = 0 They are set in the ascending order and ends with <00>. If the tab setting position <nK> is equal or smaller than the preceding set iDP3420/3421/3423 User’s Manual Up to 16 vertical tabs CITIZEN...
  • Page 85 This command sets the left margin and printing starts from the column next to the set margin. ESC "Q" n [Function] Setting the right margin [Code] <1B>H <51>Hn [Range] 2 n (Max. print columns) [Outline] This command sets the right margin and printing is performed up to n-columns. iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 86 [Function] Horizontal tab [Code] <09>H [Outline] This command moves a printing position to the preset next horizontal tab position. command will be ignored unless there is the next horizon tal tab position. iDP3420/3421/3423 User’s Manual This CITIZEN...
  • Page 87 If the data exceeds this limit, it will be processed as If the data <n>k exceeds the one-line print range, the set column position will iDP3420/3421/3423 User’s Manual n indicates the number of lines from the n from the head of the line.
  • Page 88 <1B>H <31>H [Outline] This command sets the line feed width to 1/9 inch. ESC "2" [Function] Setting the 2/9-inch line feed width [Code] <1B>H <32>H [Outline] This command sets the line feed width to 2/9 inch. iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 89 This command prints the bit image by the number of data specified with n1. be unidirectional. ignored. image. The surplus data exceeding the printable quantity in one line will be The printer will automatically return to the character mode after printing the bit iDP3420/3421/3423 User’s Manual Printing will CITIZEN...
  • Page 90 This command prints the 8-dot double density (Half-dot print) bit image. unidirectional. The printer will automatically return to the character mode after printing the bit ima ge. The relations between the printing head pin numbers and the data are the same as the 8-dot standard density bit image command.
  • Page 91 It cannot be combined with the inverted character command, <SI>. characters and ordinary characters shall be bottom -justified. In combination with the <SO> command, this Double height character command Deselects Selects iDP3420/3421/3423 User’s Manual The double height CITIZEN...
  • Page 92 Horizontal adjacent dots cannot be printed. m0 = 0 or m0 = 128 When defining only one character, set n1 = n2. iDP3420/3421/3423 User’s Manual n1 is a character code to start definition Once the download bit image is defined,...
  • Page 93 <IB>H <25>H n [Outline] This command selects/deselects the download character set. cannot be printed by simply defining them with the above-mentioned ESC & 0 command. To print them, send this command to the printer. Download Character Set Deselects Selects iDP3420/3421/3423 User’s Manual...
  • Page 94 [Outline] This command drives the drawer connector no. 2 pin under the condition set with the <ESC><BEL> n1 n2 command. buffer. 10 (ms) 10 (ms) This command is executed in order of entry into the input iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 95 As soon as this command is received, the drawer connector no. 5 pin is driven. power-on time is 200 ms ON and 200 ms OFF stationary. driven simultaneously. [Function] Buzzer-on [Code] <1E>H [Outline] This command emits a short warning sound from the printer. iDP3420/3421/3423 User’s Manual The drawers 1 and 2 cannot be CITIZEN...
  • Page 96 <DC1>. [Function] Setting the select mode [Code] <11H> [Outline] If the printer receives this command, it will save the subsequent data in the input buffer. iDP3420/3421/3423 User’s Manual In the STX-EXT mode of the serial The Deselect mode is CITIZEN...
  • Page 97 [Function] Initializing the printer [Code] <1B>H <40>H [Outline] This command cancels various conditions set after power-on to initializes the printer to the conditions having existed at power-on. Bidirectional print Unidirectional print However, the input buffer is not initialized. iDP3420/3421/3423 User’s Manual...
  • Page 98 [Outline] This command is valid only for the serial interface. information. STX-ETX mode, the printer will send the status information and check byte. If this command is entered after receiving the text information in the iDP3420/3421/3423 User’s Manual The printer sends the status...
  • Page 99 This command is valid only for the serial interface. [Function] Text end [Code] <03>H [Outline] This command is valid only for the serial interface. the data. iDP3420/3421/3423 User’s Manual It effectuates the STX-ETX mode. It ends the STX-ETX mode and prints CITIZEN...
  • Page 100 Receives Status Receives Check Byte Status Error ? Check Byte = Test Byte ? Sets Test Byte To STX-ETX Mode Data Block Ready to Send ? iDP3420/3421/3423 User’s Manual Sends ENQ Sends ETX Sends CAN (Print) STX-ETX Mode End CITIZEN...
  • Page 101 Character Code Table Star International Star Domestic Codepage PC850 (Multilingual) Codepage PC860 (Portuguesel) Codepage PC863 (Canadan-French) Codepage PC865 (Nordic) iDP3420/3421/3423 User’s Manual (iDP3421/3423 Only) (iDP3421/3423 Only) Character Code Table Codepage PC852 (Eastern Europe) Codepage PC866 (Russian) Codepage PC857 (Turkish) Windows Codepage...
  • Page 102 If the data exceeds 50 bytes, the subsequent data will be treated as If the value of n is specified beyond the range, the iDP3420/3421/3423 User’s Manual If the value of n is specified The data should end with...
  • Page 103 Deletes all the download function specified with n1. Deletes the data downloaded at the value specified with n2 (Value specified when saving with each download command), of the download function specified with n1. iDP3420/3421/3423 User’s Manual It stops The PE signal (Parallel CITIZEN...
  • Page 104 24 m denotes the number to be registered. d denotes the bit image data. iDP3420/3421/3423 User’s Manual 8 and that of vertical dots is represented by (See a download bit image Once the download bit image is defined, it...
  • Page 105 If the print buffer contains the data, this command will be ignored. If the bit image has not been saved in the specified number, this command will be ignored. Nothing is printed when m is other than 0,1,2 or 3. iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 106: Esc/Pos Commands

    Setting the print lines after paper near end detection Deleting the download character, message, bit image Defining the download, bit image Printing the download, bit image iDP3420/3421/3423 User’s Manual Code 1BH 20H n 1BH 21H n 1BH 25H n 1BH 26H s n m...
  • Page 107 This command prints one line worth of the data saved in the print buffer and feeds the line based on the set line feed value. position. iDP3420/3421/3423 User’s Manual Initial setting of the horizontal tab position The head of the line is assumed to be the next print start...
  • Page 108 This command prints the data. will print the data in the print buffer and feed the paper by one line. the printer will print the data in the print buffer and will not feed the paper. ESC " " n...
  • Page 109 When printing the double height characters, there will be less shear in unidirectional printing. [Default] n = 0 Function Undefined Undefined Undefined High-lighting Canceled Double height Canceled Double width Canceled Undefined Underline Canceled iDP3420/3421/3423 User’s Manual Values Specified Specified Specified Specified If both If the CITIZEN...
  • Page 110 This command selects/deselects the download character set. significant bit. Setting n0 = 1 selects the download character set. Setting n0 = 0 deselects the download character set. [Default] n = 0 iDP3420/3421/3423 User’s Manual n is valid only for the least CITIZEN...
  • Page 111 - n + 1 When defining only one character, set n = m. Once the download characters are defined, they remain valid iDP3420/3421/3423 User’s Manual s denotes the number of a specifies the number of dots in The remaining pattern on the...
  • Page 112 The following table shows the bit image modes for m. Vertical Dot Density Dots Single density Double density Normal data processing will be restored after completing bit image print. iDP3420/3421/3423 User’s Manual Horizontal Direction Adjacent Dot Total Dots Setting Allowed Disallowed...
  • Page 113 [Function] Initializing the printer [Code] <1B>H <40>H [Outline] This command cancels various conditions set after power-on to initializes the printer to the conditions having existed at power-on. device drive pulse width are not initialized. not re-read. iDP3420/3421/3423 User’s Manual However, the print buffer, input buffer, and external...
  • Page 114 ESC D NUL clears all the set tab positions. The data beyond this limit are processed as normal iDP3420/3421/3423 User’s Manual The tab position is set at the The character width at this time includes the HT is ignored after clearing.
  • Page 115 [Outline] This command selects the international characters according to the value of n. [Default] Depends upon DIP switch setting. Character Set U.S.A. France Germany U.K. Denmark I Sweden iDP3420/3421/3423 User’s Manual Character Set Italy Spain Japan Norway Denmark II CITIZEN...
  • Page 116 This command selects/deselects unidirectional print. bit. [Caution] If unidirectional print is selected, the printer will print from the left to the right. want to prevent horizontal shear in printing at high accuracy, specify unidirectional print with this command. (Double height print, etc.)
  • Page 117 Therefore, the paper cannot be fed by the LF switch. [Default] n = 0 Function Paper near end Disabled Undefined Undefined Undefined Undefined Undefined Undefined Undefined iDP3420/3421/3423 User’s Manual Value Enabled − − − − − − − − − −...
  • Page 118 This command feeds the paper by n-lines after printing the one line worth of data saved in the print buffer. ESC i [Function] Full cut [Code] <1B>H<69>H [Outline] This command fully cuts the paper. ESC m [Function] Partial cut [Code] <1B>H<6D>H [Outline] This command partially cuts the paper. iDP3420/3421/3423 User’s Manual (iDP3421/3423 Only) (iDP3421/3423 Only) CITIZEN...
  • Page 119 (Drawer kick-out connector No. 4 pin). Connector Pin Drawer kick connector No. 2 pin Drawer kick connector No. 5 pin iDP3420/3421/3423 User’s Manual or more. For the drawer power, be sure to use the Do not use a...
  • Page 120 The command is valid only when it is entered at the head of the line. Codepage PC852 (Eastern Europe) Codepage PC866 (Russian) Codepage PC857 (Turkish) Windows Codepage Space Page (For user setting) iDP3420/3421/3423 User’s Manual Setting n = 0 selects black. Setting n = Character Code Table CITIZEN...
  • Page 121 This command is valid only for the serial interface. the bit 0 will be always "1". signal has the Mark status), the printer will wait until it will be ready to receive. XON/XOFF control, only one byte will be sent without confirming the status of the DSR signal.
  • Page 122 If the printing is under way when the command is being processed, however, Function Paper near end With paper Undefined Paper near end With paper Undefined Undefined 0 stationary Undefined Undefined iDP3420/3421/3423 User’s Manual Therefore, it may take Value Near end CITIZEN...
  • Page 123 Deselected Print Direction If the data exceeds 50 bytes, the subsequent data will be treated as iDP3420/3421/3423 User’s Manual n is valid only for the least significant bit. When Inverted Print Is Selected If the value of n is specified...
  • Page 124 [Default] n = 0 If the value of n is specified beyond the range, the 2 lines since detection of the paper near end, resulting in the paper iDP3420/3421/3423 User’s Manual It stops The PE signal (Parallel CITIZEN...
  • Page 125 Download bit image Deletes all the download function specified with n1. Deletes the data downloaded at the value specified with n2 (Value specified when saving with each download command), of the download function specified with n1. iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 126 (ESC DC2 n1 n2) is executed. m denotes the number to be registered. d denotes the bit image data. iDP3420/3421/3423 User’s Manual (See a download bit image Once the download bit image is defined, it CITIZEN...
  • Page 127 If the print buffer contains the data, this command will be ignored. If the bit image has not been saved in the specified number, t his command will be ignored. Nothing is printed when m is other than 0, 1, 2 or 3. iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 128: Character Codes Table

    User’s Manual 14. CHARACTER CODES TABLE 14.1 CBM (Japanese) CITIZEN...

  • Page 129: Cbm (International)

    User’s Manual 14.2 CBM (International) CITIZEN...

  • Page 130: Star (Japanese)

    User’s Manual 14.3 Star (Japanese) CITIZEN...

  • Page 131: Star (International)

    User’s Manual 14.4 Star (International) CITIZEN...

  • Page 132: Codepage Pc437 (Usa,European Standard)

    User’s Manual 14.5 Codepage PC437(USA,European Standard) CITIZEN...

  • Page 133: Codepage Katakana (Japanese)

    User’s Manual 14.6 Codepage Katakana(Japanese) CITIZEN...

  • Page 134: Codepage Pc850 (Multilingual)

    User’s Manual 14.7 Codepage PC 850(Multilingual) CITIZEN...

  • Page 135: Codepage Pc860(Portuguese)

    User’s Manual 14.8 Codepage PC860(Portuguese) CITIZEN...

  • Page 136: Codepage Pc863 (Canadian-French)

    User’s Manual 14.9 Codepage PC863(Canadian-French) CITIZEN...

  • Page 137: Codepage Pc865(Nordic)

    User’s Manual 14.10 Codepage PC865(Nordic) CITIZEN...

  • Page 138: Codepage Pc852(Eastern Europe)

    User’s Manual 14.11 Codepage PC852(Eastern Europe) CITIZEN...

  • Page 139: Codepage Pc866(Russian)

    User’s Manual 14.12 Codepage PC866(Russian) CITIZEN...

  • Page 140: Codepage Pc857(Turkish)

    User’s Manual 14.13 Codepage PC857(Turkish) CITIZEN...

  • Page 141: Windows Codepage

    User’s Manual 14.14 Windows Codepage CITIZEN...

  • Page 142: International Character Codes Table

    User’s Manual 14.15 International Character Codes Table CITIZEN...

  • Page 143: Appendix 1. Block Diagram

    120 V AC, 50/60 Hz 230 V AC, 50/60 Hz OSC16MHz Driver Driver Reset Vp Vcc Filter Power Supply iDP3420/3421/3423 User’s Manual Print Head Paper Moter Printer Mechanism Vp : For mechanism drive, For drawer kick Vcc:For circuit drive CITIZEN...

  • Page 144: Appendix 2. Outline Drawing For Idp3420

    User’s Manual APPENDIX 2. OUTLINE DRAWING for iDP3420 CITIZEN...

  • Page 145: Appendix 3. Outline Drawing For Idp3421

    User’s Manual APPENDIX 3. OUTLINE DRAWING for iDP3421 CITIZEN...

  • Page 146: Appendix 4. Outline Drawing For Idp3423

    User’s Manual APPENDIX 4. OUTLINE DRAWING for iDP3423 CITIZEN...
  • Page 147 <<<German>>>...
  • Page 148 8. Bitte wenden Sie sich mit Fragen oder Hinweisen auf Fehler oder Auslassungen im Text dieser Anleitung an unsere Geschäftsstelle. 9. Beachten Sie jedoch, daß wir, ungeachtet des obigen Punkts 8, keinerlei Haftung für negative Folgeerscheinungen im Zusammenhang mit dem Betrieb dieses Geräts übernehmen. <VORSICHT> ist das Gerät ausschließlich auf die in der iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 149 Dieses Symbol ruft den Bediener zu erhöhter Wachsamkeit auf. Dieses Symbol weist auf wichtige Informationen, wie z.B. Bedienungsschritte oder dergleichen, hin. Die Mißachtung dieser Vorsichtsmaßregel kann zu Körperverletzungen mit möglicher Todesfolge führen. Die Mißachtung dieser Vorsichtsmaßregel kann zu Körperverletzungen oder Sachschäden führen. iDP3420/3421/3423 User’s Manual CITIZEN...
  • Page 150 User’s Manual WARNUNG Beim Betrieb des Geräts sind die nachfolgenden Vorsichtsmaßregeln unbedingt zu beachten. Eine Mißachtung dieser Hinweise kann zu Schäden, Funktionsstörungen, Rauchentwicklung und Brandgefahr durch Überhitzen und zu elektrischen Schlägen führen. Der fortgesetzte Betrieb des Geräts in anormalem Zustand, wie z.B. nach einer Beschädigung, kann Funktionsstörungen, Rauchentwicklung, fremde Gerüche/Geräusche und Brände verursachen.
  • Page 151 User’s Manual VORSICHTSMASSREGELN FÜR DIE AUFSTELLUNG Das Gerät nicht an Plätzen abstellen oder betreiben, an denen es Feuer, Feuchtigkeit oder direkter Sonnenbestrahlung ausgesetzt ist. Ebenso sind Plätze in der Nähe von Heizkörpern und sonstigen Wärmenquellen zu vermeiden, an denen Umgebungstemperatur und Luftfeuchtigkeit nicht den vorgeschriebenen Betriebsbedingungen entsprechen, sowie Plätze, an denen das Gerät Öl, Metallspänen oder...
  • Page 152 Bei Auftreten jeglicher Störungen während des Betriebs den Drucker sofort ausschalten, und das Netzkabel aus der Steckdose ziehen. Die Beseitigung von Betriebsstörungen ist qualifiziertem Fachpersonal zu überlassen. Niemals versuchen, das Gerät eigenhändig zu zerlegen. Beim Öffnen/Schließen der Druckerabdeckung darauf achten, nicht die Hand oder Finger am Drucker einzuklemmen. iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 153: Tägliche Wartung

    User’s Manual TÄGLICHE WARTUNG Vor der Wartung zuerst den Drucker ausschalten. Schmutz und Staub mit einem trockenen, weichen Tuch vom Druckergehäuse abwischen. Bei starker Verschmutzung einen Lappen in Wasser anfeuchten, auswringen und damit abwischen. Hierzu niemals flüchtige organische Lösungsmittel, wie z.B. Alkohol, Terpentin, Trichlorethan, Benzol, Keton oder chemische Staubentfernungsmittel, verwenden.

  • Page 154: Anschluß Des Netzkabels

    Bei Blitzschlag den Netzstecker aus der Steckdose ziehen und den Drucker während der Dauer des Gewitters nicht benutzen. Blitzschlag kann Brände und elektrische Schläge verursachen. Wenn der Drucker längere Zeit nicht benutzt werden soll, den Netzstecker zur Sicherheit aus der Steckdose ziehen. Netzkabel Netzanschlußbuchse iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 155: Anschluß Des Schnittstellenkabels

    2. Den Stecker korrekt ausrichten und an die Schnittstellenbuchse anschließen. 3. Den Kabelstecker an der Buchse befestigen. Serienschnittstelle Parallelschnittstelle : Die Klemmen andrücken. 4. Das Schnittstellenkabel an den Computer anschließen. Serienschnittstellenkabel : Die Steckerschrauben eindrehen. Serienschnittstellenbuchse Steckerklemme Parallelschnittstellenkabel Schnittstelle iDP3420/3421/3423 User’s Manual Parallelschnittstellenbuchse CITIZEN...

  • Page 156: Anbringen Des Ferritkerns Am Schnittstellenkabel

    Endfläche innerhalb von 5 cm liegt. 4. Den Arm des Ferritkerns mit einem Kabelbinder am Kabel befestigen, so daß sich der Ferritkern nicht verschieben kann. Den überstehenden Teil des Kabelbinder abschneiden. iDP3420/3421/3423 User’s Manual Ferritkern Ferritkern Schnittstellenkabel Bis zu 5 cm Kabelbinder...

  • Page 157: Öffnen/Schließen Des Automatischen Schneidemechanismus

    Der automatische Schneidemechanismus wird vom einem Magnet gehalten. Den des automatischen Schneidemechanismus halten und zum Öffnen/Schließen in die durch den Pfeil angezeigte Richtung drehen. VORSICHT: Den automatischen Schneidemechanismus behutsam schließen, um Stöße zu vermeiden. Automatischer Schneidemechanismus iDP3420/3421/3423 User’s Manual Schubladenausschubbuchse Erdungsanschluß CITIZEN...

  • Page 158: Einlegen Der Farbbandkassette

    (5) Den Knopf an der Farbbandkassette in die durch den Pfeil angezeigte Richtung drehen, um das Band zu straffen. (6) Die Farbbandkassette zum Herausnehmen anheben und dabei gleichzeitig die Halteklemmen nach innen drücken. (7) Den automatischen Schneidemechanismus (iDP3421/3423) schließen. VORSICHT : Den automatischen Schneidemechanismus vorsichtig schließen. Druckkopfabdeckung Walze Farbband iDP3420/3421/3423 User’s Manual Farbbandkassette Knopf Halteklemme CITIZEN...

  • Page 159: Das Papier (Idp3420/3421) Einlegen

    Einlegen des Papiers 4.7.1 Das Papier (iDP3420/3421) einlegen. (1) Mit den Fingern in die Aussparungen der Druckerabdeckung greifen und die Abdeckung bis zum Anschlag öffnen. (2) Das Ende der Papierrolle im rechten Winkel abschneiden. VORSICHT: Ausschließlich die vorgeschriebene Papiersorte verwenden.
  • Page 160 User’s Manual Einlegerichtung der Papierrolle Richtig Falsch CITIZEN...

  • Page 161: Einlegen Der Papierrolle (Doppellagiges Durchschlagpapier) (Idp3423)

    Das Papier während des Druckens nicht festhalten, da können. Den automatischen Schneidemechanismus vorsichtig schließen, um Stöße zu vermeiden. Wickelspule Wickelrichtung Querschnittdarstellung des Papierwegs (doppellagiges Durchschlagpapier) (Originalpapier) durch Journalstreifen Papierrolle (doppellagiges Durchschlagpapier) iDP3420/3421/3423 User’s Manual enge Öffnung automatischen hierdurch Papierstaus entstehen Automatischer Schneidemechanismus Kassenzettelpapier Druckmechanismus CITIZEN...

  • Page 162: Herausnehmen Der Vollen Papierrolle (Idp3423)

    Sensoreinheit angezeigt wird (bei Verwendung der vorgeschriebenen Papierrolle). Markierungsposition Sensoreinheit Wickelspule Papierrolle (Kassenzettelpapier) Durchmesser der Restliche Papierlänge Restpapierrolle Etwa ø21 mm Etwa ø23 mm Etwa ø25 mm Sensorbefestigungsschraube iDP3420/3421/3423 User’s Manual Etwa 1,2 m Etwa 2,2 m Etwa 3,2 m Papierrestmarkierungen CITIZEN...

  • Page 163: Herausnehmen Der Restpapierrolle

    (3) Den Papierfreigabehebel in Pfeilrichtung stellen. Die Papiervorschubwalze gibt hierdurch das Papier frei, so daß der Papierstau beseitigt werden kann. (4) Jegliches im Papierweg aufgestaute Papier beseitigen. VORSICHT: Beim Herausziehen des Papiers (in Vorwärts- oder Rückwärtsrichtung) unbedingt den Papierfreigabehebel betätigen. iDP3420/3421/3423 User’s Manual Papierfreigabehebel CITIZEN...

  • Page 164: Initialisierung Des Schneidemechanismus

    Pfeil angezeigte Richtung drehen, um die Schneidklinge zurückzuziehen. Gestautes Papier oder Papierreste vollständig entfernen, falls vorhanden. VORSICHT: Beim Herausziehen des Papiers (in Vorwärts- oder Rückwärtsrichtung) unbedingt den Papierfreigabehebel betätigen. Den automatischen Schneidemechanismus behutsam schließen, um Stöße zu vermeiden. Automatischer Schneidemechanismus iDP3420/3421/3423 User’s Manual Notfallknopf CITIZEN...

  • Page 165: Bedienfeld Und Fehleranzeigen

    Befehls zum Einstellen der Druckzeilenanzahl nach der Erkennung des zuende gehenden Papiervorrats.) Wenn der Schneidepositionssensor in der Papierschneideeinheit bei laufendem Schneidemotor länger als 1 Sekunde ein- oder ausgeschaltet ist, wird die Schneide- und Druckfunktion durch Sperren des Motors ausgeschaltet. iDP3420/3421/3423 User’s Manual Signalgeber Rückstellmethode Den Netzschalter rückstellen.
  • Page 166 Papier fortlaufend vorgeschoben. 4. FEED-Taste und Netzschalter Durch Einschalten der Netzversorgung folgt der Drucker, je nachdem wie die FEED-Taste gedrückt wird, dem auf der nächsten Seite beschriebenen "Einschalten". Betriebsablauf beim iDP3420/3421/3423 User’s Manual Netzanzeigelämpchen (POWER) Fehlerlämpchen (ERROR) Papiervorschubtaste (FEED) CITIZEN...

  • Page 167: Betriebsfluß Beim Einschalten

    User’s Manual 4.13 Betriebsfluß beim Einschalten Einschalten Feed SW ? "Pufferdaten löschen" Pufferdaten Ja (FEED SW) und vergrößerter Rot-Druck NEIN 1 Sek. vergangen 1 Sek. vergangen FEED SW ? FEED SW ? (FORTSETZEN) (ERNEUT) Druckt "=Hexadecimal Dum=" Testdruck Eingabepuffer leer...

  • Page 168: Dip Schalter-Einstellung

    3. Wenn die Papierrolle eingesetzt ist, diese vom Papierhalter entfernen. 4. Die DIP-Schalterabdeckung entfernen. Der DIP-Schalter befindet sich an der Stelle, wie in der Abbildung unten gezeigt. (Nur DS1 steht für die parallele Schnittstelle zur Verfügung.) iDP3420/3421/3423 User’s Manual DIP-Schalterabdeckung CITIZEN...

  • Page 169: Dip-Schalter-Einstellungen

    Siehe Tabelle unten 42 Stellen 6K Byte Siehe Tabelle unten DS1-3 DS1-4 Betriebsmodus ESC/POS Ignoriert Star Auto-Schneidfunkti iDP3420/3421/3423 User’s Manual Bei Auslieferung ab Werk Nein ON *1 ON *2 ON *2 ON *2 40 Stellen 256 Byte OFF *3 OFF *3...
  • Page 170 Druckkopf; sie bedeutet nicht, daß 2-Seiten-Papier nicht für die Einstellung 1P verfügbar ist. Das gleiche gilt, wenn 1-Seiten-Papier für die Einstellung 2P verwendet wird. 8 Bit 7 Bit Nein Ungerade Gerade DTR/DSR XON/XOFF Siehe Tabelle unten DS2-6 DS2-7 iDP3420/3421/3423 User’s Manual Werksseitige Einstellung CITIZEN...

  • Page 171: Einstellung Der Vorwahl-Jumperstecker

    * = Offen 1-C* = 1-C oder offen 2-C* = 2-C oder offen Parallele Schnittstelle Star ESC/POS 1-C * 1-C * 1-C * 1-C * 2-C * 2-C * Star ESC/POS 2-C * 1-C * 2-C * iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 172: Methode Für Moduseinstellung

    Dieser Drucker hat die Modi CBM, Star und ESC/POS. Jeder gewünschte Modus kann gewählt und nach Bedarf eingestellt werden. (1) Einstellmethode Siehe 5. DIP-SCHALTER-EINSTELLUNG Unter bezug auf die Einstellungen der DIP-Schalter-Segmente 1-9 und 1-10 und die der Vorwahl-Jumperstecker jeden Modus einstellen. iDP3420/3421/3423 User’s Manual CITIZEN...

  • Page 173: Wartung Und Kundendienst

    User’s Manual 12. WARTUNG UND KUNDENDIENST Für Informationen über Wartung und Kundendienst wenden Sie sich bitte an unseren Händler. CITIZEN...
  • Page 174 1.10E-0605 Printed in Japan...

This manual is also suitable for:

Idp3421Idp3423

Table of Contents

Save PDF