Drawer Kick-Out Connector; Specifications Of Drawer Kick-Out Connector; Connector's Pin Configuration; Drive Circuit - Citizen iDP3420 User Manual

11. DRAWER KICK-OUT CONNECTOR

11.1

Specifications of Drawer Kick-Out Connector

(1) Drawer kick-out drive signal
Parallel ----- Can be learned at the no. 34 pin of the interface connector
Serial ----- Provided with a command to learn the status in the Star and ESC/POS modes.
(2) Electrical characteristics
1) Drive voltage: 24 V DC
2) Drive current: 0.8 A at maximum (Within 510 ms)
3) Switch signal: Signal level
11.2

Connector's Pin Configuration

No.
1
2 DRAWER 1
3 DRSW
4
5 DRAWER 2
6
CAUTION
11.3

Drive Circuit

Signal
FG Frame Ground
Drawer 1 drive signal
Drawer switch input
VDR Drawer drive power
Drawer 2 drive signal
GND Common ground on the circuit
Connector used
Applicable connector
: No output is made while printing.
The drawers 1 and 2 cannot be driven simultaneously.
A solenoid used for the drawer should be of 36 or more.
kept below 0.8 A. Use beyond this limit cannot be assured.
This connector cannot be connected to a telephone line.
the solenoid.
"L" = 0 to 0.5 V
"H" = 3 to 5 V
Function
: TM5RJ3-66 (HIROSE)
: TM3P-66P (HIROSE) or equivalent
38
iDP3420/3421/3423 User's Manual
An output current should be
Do not connect other than
CITIZEN