Attaching The Ferrite Core To The Interface Cable - Citizen iDP3420 User Manual

4.3

Attaching the Ferrite Core to the Interface Cable

1. Turn off the power.(Mating side included)
2. With a regular screwdriver, unlatch and open the
ferrite core.
3. Attach the ferrite core to the interface cable so
that its end face will be within up to 5 cm.
4. Secure the arm of the ferrite core onto the cable
with a fastener so that the ferrite core will not
move. Cut off the surplus part of the fastener.
Ferrite Core
10
iDP3420/3421/3423 User's Manual
Ferrite Core
Interface Cable
Within 5 cm
Fastener
Arm
CITIZEN