Operation Panel And Display Of Error - Citizen iDP3420 User Manual

4.12

Operation Panel and Display of Error

1. POWER lamp (Green)
This lamp is illuminated when the power is supplied.
2. ERROR lamp (Red)
This lamp is illuminated or blinks to indicate each error.
Error Indication
Mechanical Error
Paper End
Paper Near End
Cutter Motor
(iDP3421/23 only)
Mechanical Error
Paper End
Paper Near End
Cutter Motor Lock
(iDP3421/23 only)
3. FEED switch
If this switch is pressed once for a short time, the paper will be fed
by 1 line.
4. FEED switch and Power switch
When the power is turned on, the printer follows the operation flow
at "power-on" on the next page, depending on how the FEED switch
is operated.
ERROR Lamp
Quick blinking
Illuminated
Blinks
(Once a second)
Lock Quick blinking
(Twice a second)
: If the printer mechanism has a greater load due to a paper jam, etc., the buzzer
will sound and the ERROR lamp will blink to stop the printer mechanism.
: If the paper has run out, the paper sensor in the paper path near the print head
will detect the end of the paper roll, turn on the buzzer, and illuminate the
ERROR lamp to stop the printer mechanism.
paper path, the paper roll will be loaded. (See 4.7 Inserting the Paper)
: If the paper is running out, the paper near end sensor will be activated to turn on
the buzzer and make the ERROR lamp blink.
detected, a command can be used to print by the specified number of lines. (See
a description on the command for setting the number of print lines after paper
near end detection)
: If the cutter position detection sensor in the cutter unit is left turned on or off
for approx. 1 second while the cutter motor is running, cutter operation and
printing will be suspended, determining it to be motor lock.
If it is held down, the paper will be fed continuously.
Buzzer
Sounds continuously for
approx. 1 second
Repeats a short 3-time
sound twice at intervals of
0.5 second.
Repeats a short 3-time
sound twice at intervals of
0.5 second.
Sounds continuously for
approx. 1 second.
19
iDP3420/3421/3423 User's Manual
Resetting Method
Reset the Power
switch.
Set a new paper roll.
Set a new paper roll.
Eliminate a paper jam.
If the paper is inserted into the
Even after the paper near end is
POWER Lamp
ERROR Lamp
FEED Switch
CITIZEN