Citizen iDP-3410 User Manual
  1. Manuals
  2. Brands
  3. Citizen Manuals
  4. Printer
  5. iDP-3410
  6. User manual
Citizen iDP-3410 User Manual

Citizen iDP-3410 User Manual

Citizen dot matrix printer user's manual
Hide thumbs Also See for iDP-3410:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
CITIZEN
User's Manual
Model : iDP-3410
Dot Matrix Printer
Rev.1.00 Newly issued on 20.Oct.1998
Japan CBM Corporation
Information Systems Div.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iDP-3410 and is the answer not in the manual?

Questions and answers

Related Manuals for Citizen iDP-3410

Summary of Contents for Citizen iDP-3410

  • Page 1 CITIZEN User's Manual Model : iDP-3410 Dot Matrix Printer Rev.1.00 Newly issued on 20.Oct.1998 Japan CBM Corporation Information Systems Div.

  • Page 2: Declaration Of Conformity

    This is a Class A products. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This declaration is applied only for 230V model. iDP-3410 User’s Manual Declaration of Conformity : Japan CBM Corporation : CBM Bldg., 5-68-10, Nakano, Nakano-ku...

  • Page 3: Important Safety Instructions

    Putting it on may cause suffocation. WICHTIGE SICHERHEITSANWEISUNGEN Lesen Sie die nachfolgenden Anweisungen sorgfältig durch und bewahren Sie sie auf. Befolgen Sie alle auf dem Drucker vermerkten Hinweise und Anweisungen. iDP-3410 User’s Manual Vor dem Reinigen...
  • Page 4 Bitte halten Sie den Kunststoffbeutel, in den die Ware verpackt ist, von Kindern entfernt, oder werfen Sie ihn weg, damit er nicht in die Hande von Kindern gerät. Das Überstülpen des Beutels kann zum Ersticken führen. Lärmemission kleiner 70dBA iDP-3410 User’s Manual Der Drucker könnte Abnehmen von Ein Verstellen anderer...
  • Page 5 8. If you have any questions or notice any clerical errors or omissions regarding the information in this manual, please contact our office. 9. Please note that, notwithstanding Item 8 above, we will not be responsible for any effects resulting from operation of the equipment. iDP-3410 User’s Manual <CAUTIONS>...
  • Page 6 User’s Manual...
  • Page 7 This is an illustration mark used to alert your attention. This is an illustration mark used to indicate such information as an instruction or the like. iDP-3410 User’s Manual Negligence of this precaution may result in death or serious injury.
  • Page 8 Do not overload a single electrical outlet, using a table tap or a current tap socket. It may result in fire or electric shock. _ An equipment packing bag must be discarded or kept away from children. A child can suffocate if the bag is placed over the head. iDP-3410 User’s Manual WARNING !

  • Page 9: Precautions For Installation

    User’s Manual PRECAUTIONS FOR INSTALLATION Do not use or store the equipment in a place exposed to fire, moisture, or direct sunlight, or in a place near a heater or a thermal device where the prescribed operating temperature and humidity are not met, or in a place exposed to much oil, iron powder, or dust.

  • Page 10: Precautions For Handling

    Should a problem occur, leave solving it to our serviceman. Do not disassemble the equipment on your own. When opening/closing the cover, and so on, be careful not to catch your hand or finger on the equipment. iDP-3410 User’s Manual...

  • Page 11: Daily Maintenance

    User’s Manual DAILY MAINTENANCE Prior to starting maintenance work, be sure to turn off the main body. Use a dry soft cloth to wipe off stains and dust from the surfaces of the main body case. For severe soiling, dip the cloth in water and wring it, for wiping off the soil. Never use organic solvents, such as alcohol, thinner, trichlene, benzene, ketone, or chemical dusters.

  • Page 12: Table Of Contents

    Input and Output Signals ... 36 9.3.1 Input and Output Signals... 36 9.3.2 Electrical Characteristics... 37 9.3.3 Timing Chart ... 38 9.3.4 Data Receiving Control... 38 10. SERIAL INTERFACE... 39 10.1 Specifications ... 39 10.2 Connector's Pin Configuration ... 40 iDP-3410 User’s Manual CONTENTS...
  • Page 13 14.11 Code Page 852... 131 14.12 Code Page 866... 132 14.13 Code Page 857... 133 14.14 Windows Code ... 134 14.15 International Character Codes Table ... 135 APPENDIX 1. BLOCK DIAGRAM ... 136 APPENDIX 2. OUTLINE DRAWING ... 137 iDP-3410 User’s Manual...
  • Page 14 Citizen, Citizen logo are registered trademark of Citizen Watch Co., Ltd. ESC/POS and EPSON are a trademark and registered trademark of SEIKO EPSON Corporation. STAR is a registered trademark of Star Micronics Corporation. Windows iDP-3410 User’s Manual <<< German >>> registered trademark Microsoft Corporation.

  • Page 15: Outline

    2. BASIC SPECIFICATIONS Model Classification The printer model is classified by the following designation method. iDP 3410 - R F 120 Model Name iDP-3410 User’s Manual ----- 1 unit ----- 1 piece ----- 1 roll ----- 1 piece ----- 1 copy...
  • Page 16 AC Adapter Types and Power Cords 34AD-U (120 V 2-core cord) 34AD-E (230 iDP-3410 User’s Manual Character Set F: International Interface CBM Mode R: Serial(RS-232C D-Sub) P: Parallel(CENTRONICS-based) STAR Mode S: Serial(RS-232C mini DIN) C: Parallel(CENTRONICS-based) ESC/POS Mode T: Serial(RS-232C D-Sub)

  • Page 17: Basic Specifications

    Mechanism: MCBF 2,500,000 lines EMI standard Safety Standard *1 *1.The AC adapter alone has acquired the Electric Appliances Control Act, UL Standard, C-UL Standard, and TUV iDP-3410 User’s Manual iDP-3410-*F120 120 V AC +/- 10 %, 50/60 Hz 34AD-U AC adapter: 0.95 kg...

  • Page 18: Paper Specifications

    2.3.2 Printing Position 2.3.3 Cutter Layout iDP-3410 User’s Manual : Normal paper and non-carbon paper : 76 +/- 0.5 mm : Single-sheet paper --- 45 55 kg / 1,000 sheets / 1,091 x 788 mm; Copying paper Non-carbon paper, 1 original + 1 copy, Total thickness 0.2 mm or less...

  • Page 19: Outer Appearance And Component Parts

    User’s Manual 3. OUTER APPEARANCE AND COMPONENT PARTS 4. OPERATION Connecting AC Adapter...
  • Page 20 Do not put the AC adapter cord near any thermal device. The coating of the power cord can melt, resulting in fire or electric shock. When the printer is not used for a long period of time, be sure to disconnect the AC adapter from the plug socket, for safety. iDP-3410 User’s Manual...

  • Page 21: Connecting Interface Cable

    (2) Check the top and bottom of the drawer kick-out cable connector, and connect it to the drawer kick-out connector located on the back of the printer. (3) Screw the grounding cable of the drawer to the grounding terminal of the printer. CAUTION : Connect only the prescribed drawer (Solenoid) to the drawer kick-out connector. iDP-3410 User’s Manual...

  • Page 22: Setting The Cassette Ribbon

    (4) Turn the knob of the cassette ribbon in the arrow-indicated direction to eliminate slackness of the ribbon. (5) To remove the cassette ribbon, lift it while tilting the locking claws on both sides toward the inside. iDP-3410 User’s Manual...

  • Page 23: Inserting The Paper

    (6) Insert the end of the paper roll straight into the paper inlet slot (Indicated by an arrow on the case). (7) The paper is automatically fed in and comes out of the paper outlet slot of the printer. (8) Close the printer cover and cut the surplus paper with a tear bar. iDP-3410 User’s Manual...
  • Page 24 User’s Manual CAUTION If the paper is slack, rewind it, to remove the slack. If the paper is set slantwise, operate the paper-free lever, to correct the paper position. While printing, do not hold the paper. This can cause a paper jam.

  • Page 25: How To Remove Remaining Paper Roll

    (3) Push the paper-free lever in the arrow direction. The paper feed roller is disengaged, to free the paper, allowing you to eliminate the jammed paper. (4) Eliminate completely the paper remaining in the paper route. CAUTION When pulling out the paper (Forward/Reverse direction), be sure to operate the paper-free lever. iDP-3410 User’s Manual...

  • Page 26: Operation Panel And Display Of Error

    (4) FEED switch and Power switch Self-print is performed by turning on the Power switch while pressing the FEED switch. iDP-3410 User’s Manual If the printer mechanism is abnormally loaded due to a paper jam, etc., the ERROR LED is illuminated, to stop the printer.

  • Page 27: Operation Flow At Power-On

    Feed SW ? Buffer data 1 Sec. Passed FEED SW ? (CONTINUE) Prints" =HexadecimalDump = Dump Mode iDP-3410 User’s Manual "Clear Data in Buffer" Yes(FEED SW) and Enlarged Red Print Test Print Buffer Data Prints "Power Down(Data in Buffer)" in Red, Followed by Buffer Contents.

  • Page 28: Dip Switch Setting

    5. DIP SWITCH SETTING Location of DIP Switch (1) Turn off the power. (2) Remove a cassette ribbon. The DIP switches are located as shown in the figure below. (Only DS1 provided for the parallel interface) iDP-3410 User’s Manual...

  • Page 29: Dip Switches Setting

    See the International Character Codes Table and Character Codes Table. CR mode(DS1-6) Mode CR+LF STAR CR+LF ESC/POS CR+LF iDP-3410 User’s Manual See the Table below See the Table below 6K bytes 256 bytes See the table below Character Code Selection DS1-3...
  • Page 30 (Note) Setting of the paper used simply changes the drive pulse width to the printing head; it does not mean that 2 ply paper is not available for the 1 ply setting. The same applies to when 1 ply paper is used for the 2 ply setting. iDP-3410 User’s Manual 8 bits 7 bits...

  • Page 31: Preset Jumper Setting

    This printer has the CBM, STAR, and ESC/POS mode. Any desired mode can be selected and set according to your need. (1) Setting method See 5. DIP SWITCH SETTING. Seeing the settings of the DIP switch 1-9 and 1-10 and those of the preset jumper, set each mode. iDP-3410 User’s Manual Parallel Interface STAR ESC/POS 1-C *...

  • Page 32: Input Buffer Backup Function

    Hold down the LF switch until the buzzer sounds. If the printer prints the data erroneously at power-on, clear the input buffer as described above, and then, re-input the data. iDP-3410 User’s Manual 6K bytes 256 bytes...

  • Page 33: Specifications

    DATA 7 DATA 8 BUSY PE(HI-LEVEL) SELECT FRAME GND iDP-3410 User’s Manual : 8-bit parallel system (DATA1 to DATA8) : ACK, BUSY, STB, FAULT, SELECT, RESET, COMPULSION : Printer side --- 57LE-40360 (Equivalent to anphenol), Cable side --- 57-30360 (Ditto)

  • Page 34: Input And Output Signals

    A signal to show that the paper has run out. Normal at the "LOW" level, but turned to the "HIGH" level when the paper has run out. (3) Power related signal : Common ground on the circuits : A +5V signal. Connected via a 3.3k resistor. iDP-3410 User’s Manual...

  • Page 35: Electrical Characteristics

    : 0.4 V at maximum (3) Input and output conditions All the input signals are pulled up at 3.3 k . [Printer Side] All the output signals are pulled up at 3.3k . [Printer Side] iDP-3410 User’s Manual [Host Side] [Host Side]...

  • Page 36: Timing Chart

    Parity bit : Odd, even, or none (User selectable) Stop bit : 1 bit or more iDP-3410 User’s Manual T1, T2, T3 : 0.5 s MIN : 270 ns MAX : 2.3 s TYP : 500 ms MIN (At power-on)
  • Page 37 = Logic "1" (-3 V -12 V) Space = Logic "0" (+3 V +12 V) (5) Received data (RXD signal) RS-232C Mark Space (6) Reception control (DTR signal) RS-232C Mark : Data transfer disabled Space : Data transfer enabled iDP-3410 User’s Manual...

  • Page 38: Connector's Pin Configuration

    Mode PE (HI-LEVEL) Cautions: 1. An RS-232C signal is based on the EIA RS-232C. 2. When the data is not being transferred, the received data should be always maintained as a mark. iDP-3410 User’s Manual STAR FAULT FAULT mTXD mRXD...

  • Page 39: Input And Output Signals

    When this signal is Space, a mechanical error has occurred. STAR mode When this signal is Mark, a mechanical error has occurred. (6) RESET A signal to reset the entire printer.(Negative logic) (7) RTS This signal is turned to Space when the printer is turned on. iDP-3410 User’s Manual...

  • Page 40: Data Configuration

    This is a Frame Ground signal. (12) GND This is a common ground on the circuit. 10.3.2 Data Configuration Mark Space iDP-3410 User’s Manual , ... (1) Start Bit (2) Data Bit (+ Parity Bit) (3) Stop Bit (1 or More)

  • Page 41: Error Detection

    When the DTR signal is a space, the data from the host side can be received. When it is a mark, however, the data cannot be received. 10.3.5 Buffering The DTR signal and the TXD signal are available as a control signal for data transfer to the input buffer. iDP-3410 User’s Manual...

  • Page 42: Electrical Characteristics

    : A signal to show that the paper has run out. Normal at the "LOW" level, but turned to the "HIGH" level when the paper has run out. : Signal ground : Frame ground iDP-3410 User’s Manual [Host Side] Mark=(-8V): Stop bit Space=(+8V): Start bit...

  • Page 43: Drawer Kick-Out Connector And Power Connector

    0. 8 A. Use beyond this limi t cannot be assured. This connector cannot be connected to a telephone line. Do not connect other than the solenoid. 11.3 Drive Circuit iDP-3410 User’s Manual "L" = 0 0.5 V "H" = 3 5 V Function...

  • Page 44: Specifications Of Power Supply Connector

    Applicable plug : JXP series Type-A (I.D. 2.45 mm, O.D. 5.5 mm) (HOSHIDEN) or equivalent CAUTION: Be sure to use the specified power supply. Use of unspecified one may lead to a trouble or breakage. Do not connect the power supply with different polarities. iDP-3410 User’s Manual Function +24V...

  • Page 45: Maintenance And Service

    DC 1 Initializing the printer Specifying/Canceling the Inverted character DC 2 DC 3 Specifying the red print Canceling the print data iDP-3410 User’s Manual Other Areas Japan CBM Corporation Information Systems Division CBM Bldg., 5-68-10, Nakano Nakano-ku, Tokyo 164-0001 Japan...

  • Page 46: Description Of Items

    [Caution] Describes a caution as required. [Default] Describes an initial value for the command when accompanied by an argument. iDP-3410 User’s Manual Specifying the bit image mode Specifying/Canceling the Underline Specifying 1/9-inch line feed rate Specifying 2/9-inch line feed rate...
  • Page 47 User’s Manual Shows a command.
  • Page 48 Note that the double width characters take up two ordinary characters worth of width. iDP-3410 User’s Manual...
  • Page 49 The settings of the DIP switch segments are not re-read. [Function] Specifying/Canceling the inverted character [Code] <12>H [Outline] This command selects/deselects the inverted characters. beginning of one line. Otherwise, it is overridden. Erect and inverted characters cannot be iDP-3410 User’s Manual Enter this command at the...
  • Page 50 User’s Manual mixed in one line.
  • Page 51 When you want to use red characters, use this command for each line. [Function] Canceling the print data [Code] <18>H [Outline] This command clears the print data in the lines entered prior to this command. iDP-3410 User’s Manual...
  • Page 52 <1B>H <31>H [Outline] This command sets the line feed width to 1/9 inch. ESC "2" [Function] Setting the 2/9-inch line feed width [Code] <1B>H <32>H [Outline] This command sets the line feed width to 2/9 inch. iDP-3410 User’s Manual n2 378...
  • Page 53 [Code] <1B>H <33>H [Outline] This command sets the line feed width to 1/6 inch(Default). ESC "C" n [Function] Setting the page length [Code] <1B>H <43>H n [Range] 1 n 127 [Outline] Sets the 1-page length to n-lines. iDP-3410 User’s Manual...
  • Page 54 This command cancels perforation skipping operation. ESC "f" 1 [Function] Form feed (Changing the page) [Code] <1B>H <66>H <01>H [Outline] This command searches for the beginning of the next page after printing the data in the print buffer. iDP-3410 User’s Manual...
  • Page 55 CBM International CBM Domestic Code Page 850 (Multilingual) Code Page 860 (Portugal) Code Page 863 (Canada-French) Code Page 865 (Norway) iDP-3410 User’s Manual Character Code Table Code Page 852 (Eastern Europe) Code Page 866 (Russia) Code Page 857 (Turkey) Windows Code...
  • Page 56 [Code] <07>H [Outline] This command drives the drawer connector no. 2 pin under the condition set with the <ESC><BEL> n1 n2 command. This command is executed in order of entry into the input buffer. iDP-3410 User’s Manual 1 n2 127...
  • Page 57 As soon as this command is received, the drawer connector no. 5 pin is driven. The power- on time is 200 ms ON and 200 ms OFF stationary. The drawers 1 and 2 cannot be driven simultaneously. [Function] Buzzer-on [Code] <1E>H [Outline] This command emits a short warning sound from the printer. iDP-3410 User’s Manual...
  • Page 58 [Code] <1B>H <52>H n [Range] 0 n 10 [Outline] This command selects the international characters according to the value of n. [Default] Depends upon DIP switch setting. iDP-3410 User’s Manual Character Set U.S.A. France Germany U.K. Denmark I Sweden Character Set...
  • Page 59 When defining only one character, set n1 = n2. You can define the ASCII codes ranging from 32 to 255. Once the download characters are defined, they remain valid until they are redefined or the download deletion command (ESC DC2 n1 n2) is executed. iDP-3410 User’s Manual...
  • Page 60 CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the subsequent data will be treated as the print data. Once the message is defined, it remains valid until it is redefined or the download deletion command (ESC DC2 n1 n2) is executed. iDP-3410 User’s Manual Download Character Set Deselects Selects...
  • Page 61 ESC DC3 n [Function] Printing the message [Code] <1B>H <13>H n [Range] 1 n 10 [Function] This command prints a message. If the value of n is specified beyond the range, the message will not be printed. iDP-3410 User’s Manual...
  • Page 62 Deletes the data downloaded at the value specified with n2 (Value specified when saving with each download command), of the download function specified with n1. Note) No meaning when n1 = 0 is set. iDP-3410 User’s Manual (Specify 0 at n1 = 0) (1 n2 10 at n1 = 1)
  • Page 63 Once the download bit image is defined, it remains valid until it is redefined or the download deletion command (ESC DC2 n1 n2) is executed. iDP-3410 User’s Manual n2 24 8 and that of vertical dots is represented by...
  • Page 64 If the print buffer contains the data, this command will be ignored. If the bit image has not been saved in the specified number, this command will be ignored. Nothing is printed when m is other than 0,1,2 or 3. iDP-3410 User’s Manual...

  • Page 65: Star Mode

    41 ESC % n Specifying/Canceling the download character set Command 42 ESC BEL n1 n2 Setting the external device drive pulse width 43 BEL Driving command A for drawer-1 iDP-3410 User’s Manual Function Function Code Page 1BH 52H n 1BH 36H...
  • Page 66 58 ESC DC2 n1 n2 image 59 GS n1 n2 Defining the download, bit image 60 GS m Printing the download, bit image iDP-3410 User’s Manual 1BH 55H n 1BH 40H 1BH 74H n 1BH 2FH n 1BH 13H n...
  • Page 67 Note that the double width characters take up two ordinary characters worth of width. iDP-3410 User’s Manual Character Set U.S.A.
  • Page 68 ESC "F" [Function] Canceling the highlight character [Code] <1B>H <46>H [Outline] This command deselects the highlight characters set with ESC "E". The data following this command will be printed in ordinary characters. iDP-3410 User’s Manual...
  • Page 69 This command prints its subsequent data in red. This command remains valid until the red print deselection command is entered. Red and black characters cannot be mixed in one line. ESC "5" [Function] Canceling the red print [Code] <1B>H <35>H [Outline] This command deselects red print. iDP-3410 User’s Manual...
  • Page 70 Otherwise, it will be invalid. Erect and inverted characters cannot be mixed in one line. [Function] Canceling the Inverted character [Code] <12>H [Outline] This command deselects the inverted characters. Enter this command at the beginning of one line. iDP-3410 User’s Manual...
  • Page 71 ESC "z" [Function] Setting the 1/6-inch line feed width [Code] <1B>H <7A>H [Outline] This command sets the line feed width to 1/6 inch (Default). iDP-3410 User’s Manual...
  • Page 72 ESC "C" <0> n [Function] Setting the n-inch page length [Code] <1B>H <43>H <0> n [Range] 1 n 127 [Outline] This command sets the length of one page to n-inches. [Default] n = 42 [Function] Vertical tab [Code] <0B> H iDP-3410 User’s Manual...
  • Page 73 User’s Manual [Outline] This command feeds the paper to the next vertical tab position. It cannot be fed unless the vertical tab position has been set. If the current position is equal to or greater than the maximum set vertical tab position, it will be fed to the head of the next page.
  • Page 74 <nk-1>, it is assumed that setting of the vertical tabs has been completed. ESC "N" n [Function] Setting the lower margin [Code] <1B>H <4E>H n [Range] 0 n 255 [Outline] This command sets the n-line lower margin. [Default] n = 0 iDP-3410 User’s Manual...
  • Page 75 This command sets the left margin and printing starts from the column next to the set margin. ESC "Q" n [Function] Setting the right margin [Code] <1B>H <51>Hn [Range] 2 n (Max. print columns) [Outline] This command sets the right margin and printing is performed up to n-columns. iDP-3410 User’s Manual...
  • Page 76 [Function] Horizontal tab [Code] <09>H [Outline] This command moves a printing position to the preset next horizontal tab position. This command will be ignored unless there is the next horizontal tab position. iDP-3410 User’s Manual...
  • Page 77 If the data <n>k exceeds the one-line print range, the set column position will equal the maximum print columns + 1. If the character width is changed after setting the horizontal tab positions, they will not change. iDP-3410 User’s Manual n from the head of the line. The character...
  • Page 78 [Code] <1B>H <31>H [Outline] This command sets the line feed width to 1/9 inch. ESC "2" [Function] Setting the 2/9-inch line feed width [Code] <1B>H <32>H [Outline] This command sets the line feed width to 2/9 inch. iDP-3410 User’s Manual...
  • Page 79 This command prints the bit image by the number of data specified with n1. Printing will be unidirectional. The surplus data exceeding the printable quantity in one line will be ignored. The printer will automatically return to the character mode after printing the bit image. iDP-3410 User’s Manual...
  • Page 80 The relations between the printing head pin numbers and the data are the same as the 8-dot standard density bit image command. When printing the double density bit image, the horizontally adjacent dots cannot be printed. iDP-3410 User’s Manual 2 378...
  • Page 81 <ESC> "K" and <ESC> "L". In combination with the <SO> command, this command can print double height, double width characters. It cannot be combined with the inverted character command, <SI>. The double height characters and ordinary characters shall be bottom-justified. iDP-3410 User’s Manual Double height character command Deselects Selects...
  • Page 82 The horizontally adjacent dots cannot be printed. Once the download bit image is defined, it remains valid until it is redefined or the download deletion command(ESC DC2 n1 n2) is executed. Horizontal adjacent dots cannot be printed. iDP-3410 User’s Manual...
  • Page 83 This command selects/deselects the download character set. The download characters cannot be printed by simply defining them with the above-mentioned ESC & 0 command. To print them, send this command to the printer. iDP-3410 User’s Manual Download Character Set Deselects...
  • Page 84 Driving command A for drawing-1 [Code] <07>H [Outline] This command drives the drawer connector no. 2 pin under the condition set with the <ESC><BEL> n1 n2 command. This command is executed in order of entry into the input buffer. iDP-3410 User’s Manual...
  • Page 85 As soon as this command is received, the drawer connector no. 5 pin is driven. The power- on time is 200 ms ON and 200 ms OFF stationary. The drawers 1 and 2 cannot be driven simultaneously. [Function] Buzzer-on [Code] <1E>H [Outline] This command emits a short warning sound from the printer. iDP-3410 User’s Manual...
  • Page 86 If the printer receives <DC3>, it will ignore the subsequent data. The Deselect mode is cancelled by <DC1>. [Function] Setting the select mode [Code] <11H> [Outline] If the printer receives this command, it will save the subsequent data in the input buffer. iDP-3410 User’s Manual...
  • Page 87 Initializing the printer [Code] <1B>H <40>H [Outline] This command cancels various conditions set after power-on to initializes the printer to the conditions having existed at power-on. However, the input buffer is not initialized. iDP-3410 User’s Manual Bidirectional print Unidirectional print...
  • Page 88 This command is valid only for the serial interface. The printer sends the status information. If this command is entered after receiving the text information in the STX-ETX mode, the printer will send the status information and check byte. iDP-3410 User’s Manual...
  • Page 89 This command is valid only for the serial interface. It effectuates the STX-ETX mode. [Function] Text end [Code] <03>H [Outline] This command is valid only for the serial interface. It ends the STX-ETX mode and prints the data. iDP-3410 User’s Manual...
  • Page 90 This command selects Page-n of Character Code Table. [Default] Depends on DIP switch setting. Character Code Table STAR International STAR Domestic iDP-3410 User’s Manual Sends ENQ Receives Status Receives Check Byte Status Error ? Check Byte = Test Byte ?
  • Page 91 User’s Manual Code Page 850 (Multilingual) Code Page 860 (Portugal) Code Page 863 (Canada-French) Code Page 865 (Norway) Code Page 857 (Turkey) Windows Code Space Page (For user setting)
  • Page 92 [Outline] This command deletes the downloaded characters, message, and bit image. All(Message, characters, bit image) Download message iDP-3410 User’s Manual (Specify 0 at n1 = 0) (1 n2 10 at n1 = 1) (32 n2 224 at n1 = 2)
  • Page 93 User’s Manual Download characters Download bit image With n2, specify which data of the function specified with n1 should be deleted. n2 = 0 Deletes all the download function specified with n1. n2 0 Deletes the data downloaded at the value specified with n2 (Value specified when saving with each download command), of the download function specified with n1.
  • Page 94 Once the download bit image is defined, it remains valid until it is redefined or the download deletion command(ESC DC2 n1 n2) is executed. iDP-3410 User’s Manual n2 24 8 and that of vertical dots is represented by...

  • Page 95: Command List

    [d] n1 + 256 n2 ESC 2 Setting the 1/6-inch line feed rate 10 ESC 3 n Setting the line feed width in minimum pitch 1BH 33H n iDP-3410 User’s Manual Function Code Page 1BH 20H n 1BH 21H n...
  • Page 96 29 ESC DC2 n1 n2 image 30 GS n1 n2 Defining the download, bit image 31 GS m Printing the download, bit image iDP-3410 User’s Manual 1BH 3CH 1BH 40H 1BH 44H [n] k 00 1BH 4AH n 1BH 52H n...
  • Page 97 This command prints one line worth of the data saved in the print buffer and feeds the line based on the set line feed value. The head of the line is assumed to be the next print start position. iDP-3410 User’s Manual...
  • Page 98 [Outline] This command sets the right space of the character. [Caution] In the double width mode, the right space will be double the set amount. Set the space in increments of half dot. [Default] n = 0 iDP-3410 User’s Manual...
  • Page 99 When printing the double height characters, there will be less shear in unidirectional printing. [Default] n = 0 iDP-3410 User’s Manual Function Undefined Undefined Undefined...
  • Page 100 This command selects/deselects the download character set. n is valid only for the least significant bit. Setting n0 = 1 selects the download character set. Setting n0 = 0 deselects the download character set. [Default] n = 0 iDP-3410 User’s Manual...
  • Page 101 (ESC DC2 n1 n2) is executed. [Default] Same as the internal character set. [Caution] The horizontally adjacent dots cannot be printed. The 2nd-byte data in the vertical direction is valid only for the most significant bit. iDP-3410 User’s Manual a 255...
  • Page 102 The following table shows the bit image modes for m. [Caution] If the value of m is beyond the conditions, the data subsequent to n1 will be processed as normal data. Normal data processing will be restored after completing bit image print. iDP-3410 User’s Manual Vertical Dot Density Dots...
  • Page 103 This command cancels various conditions set after power-on to initializes the printer to the conditions having existed at power-on. However, the print buffer, input buffer, and external device drive pulse width are not initialized. The settings of the DIP switch segments are not re-read. iDP-3410 User’s Manual...
  • Page 104 Even if the character width is changed after setting the horizontal tab position, the latter will not change. [Default] 7 9 font, every 8 characters (9th, 17th, 25th column, and so on) iDP-3410 User’s Manual n from the head of the line. The character width at this time includes the...
  • Page 105 [Code] <1B>H <52>H n [Range] 0 n 10 [Outline] This command selects the international characters according to the value of n. [Default] Depends upon DIP switch setting. iDP-3410 User’s Manual Character Set U.S.A. France Germany U.K. Denmark I Sweden Character Set...
  • Page 106 Setting n = 0 enables the panel switches. [Caution] If the panel switches are disabled with this command, the LF switch will be disabled. Therefore, the paper cannot be fed by the LF switch. iDP-3410 User’s Manual Function Deselects Selects...
  • Page 107 ESC "d" n [Function] Printing and n-line paper feed [Code] <1B>H <64>H n [Range] 0 n 255 [Outline] This command feeds the paper by n-lines after printing the one line worth of data saved in the print buffer. iDP-3410 User’s Manual...
  • Page 108 The drawer kick-out solenoid should have a resistance value of 36 lower one because an overcurrent will flow. For the drawer power, be sure to use the printer power (Drawer kick-out connector No. 4 pin). iDP-3410 User’s Manual Connector Pin Drawer kick connector No. 2 pin Drawer kick connector No.
  • Page 109 Code Page 437 (U.S.A.) Katakana Code Page 850 (Multilingual) Code Page 860 (Portugal) Code Page 863 (Canada-French) Code Page 865 (Norway) iDP-3410 User’s Manual Character Code Table Code Page 852 (Eastern Europe) Code Page 866 (Russia) Code Page 857 (Turkey) Windows Code...
  • Page 110 XON/XOFF control, only one byte will be sent without confirming the status of the DSR signal. Note that it may take time to send the status after receiving the command. iDP-3410 User’s Manual Connector Pin Drawer kick-out connector No. 3 pin...
  • Page 111 If the printing is under way when the command is being processed, however, the then status will be sent after completing print feed of that line. Therefore, it may take time to send the status after receiving the command. iDP-3410 User’s Manual Function Paper near end...
  • Page 112 CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the subsequent data will be treated as the print data. Once the message is defined, it remains valid until it is redefined or the download deletion command (ESC DC2 n1 n2) is executed. iDP-3410 User’s Manual Type Deselects the inverted characters. Selects the inverted characters.
  • Page 113 ESC DC3 n [Function] Printing the message [Code] <1B>H <13>H n [Range] 1 n 10 [Function] This command prints a message. If the value of n is specified beyond the range, the message will not be printed. iDP-3410 User’s Manual...
  • Page 114 With n2, specify which data of the function specified with n1 should be deleted. n2 = 0 n2 0 Note) No meaning when n1 = 0 is set. iDP-3410 User’s Manual (Specify 0 at n1 = 0) (1 n2 10 at n1 = 1) (32 n2 224 at n1 = 2)
  • Page 115 8, respectively. m denotes the number to be registered. (See a download bit image printout.) d denotes the bit image data. Once the download bit image is defined, it remains valid until it is redefined or the download deletion command (ESC DC2 n1 n2) is executed. iDP-3410 User’s Manual...
  • Page 116 If the print buffer contains the data, this command will be ignored. If the bit image has not been saved in the specified number, this command will be ignored. Nothing is printed when m is other than 0, 1, 2 or 3. iDP-3410 User’s Manual...

  • Page 117: Character Codes Table

    User’s Manual CHARACTER CODES TABLE 14.1 CBM (Domestic)

  • Page 118: Cbm (International)

    User’s Manual 14.2 CBM (International)

  • Page 119: Star (Domestic)

    User’s Manual 14.3 STAR (Domestic)

  • Page 120: Star (International)

    User’s Manual 14.4 STAR (International)

  • Page 121: Code

    User’s Manual 14.5 Code Page 437...

  • Page 122: Katakana

    User’s Manual 14.6 Katakana...

  • Page 123: Code

    User’s Manual 14.7 Code Page 850...

  • Page 124: Code

    User’s Manual 14.8 Code Page 860...

  • Page 125: Code

    User’s Manual 14.9 Code Page 863...

  • Page 126: Code

    User’s Manual 14.10Code Page 865...

  • Page 127: Code

    User’s Manual 14.11Code Page 852...

  • Page 128: Code

    User’s Manual 14.12Code Page 866...

  • Page 129: Code

    User’s Manual 14.13Code Page 857...

  • Page 130: Windows Code

    User’s Manual 14.14Windows Code...

  • Page 131: International Character Codes Table

    User’s Manual 14.15International Character Codes Table...

  • Page 132: Appendix 1. Block Diagram

    ERROR LED FEED Switch DIP Switch Drawer Driver Interface Parallel (CENTRONICS Based) Serial (RS-232C Based) AC Adapter 34 AD Series (26V DC, 1.15A) iDP-3410 User’s Manual OSC16MHz Driver Driver Reset Vp Vcc Filter Power Supply Print Head Paper Moter Driver...

  • Page 133: Appendix 2. Outline Drawing

    User’s Manual APPENDIX 2. OUTLINE DRAWING...

  • Page 134: German

    Datenverlust, Unfällen, Reparaturen, Tests usw. keinerlei Haftung übernehmen. 8. Bitte wenden Sie sich mit Fragen oder Hinweisen auf Fehler oder Auslassungen im Text dieser Anleitung an unsere Geschäftsstelle. iDP-3410 User’s Manual <<<German>>> <VORSICHT> ist das Gerät ausschließlich auf die in der...
  • Page 135 User’s Manual 9. Beachten Sie jedoch, daß wir, ungeachtet des obigen Punkts 8, keinerlei Haftung für negative Folgeerscheinungen im Zusammenhang mit dem Betrieb dieses Geräts übernehmen.
  • Page 136 VORSICHT Dieses Symbol ruft den Bediener zu erhöhter Wachsamkeit auf. Dieses Symbol weist auf wichtige Informationen, wie z.B. Bedienungsschritte oder dergleichen, hin. iDP-3410 User’s Manual Die Mißachtung dieser Vorsichtsmaßregel kann zu Körperverletzungen mit möglicher Todesfolge führen. Die Mißachtung dieser Vorsichtsmaßregel kann zu Körperverletzungen oder...
  • Page 137 Das Netzteil niemals mit nassen Händen anschließen oder trennen. Hierdurch können Brände, elektrische Schläge und sonstige Probleme entstehen. _ Verpackungsbeutel sind vorschriftsgemäß zu entsorgen oder ansonsten von Kindern fernzuhalten. Kleinkinder können durch Überstreifen eines Plastikbeutels ersticken. iDP-3410 User’s Manual WARNUNG...
  • Page 138 User’s Manual VORSICHTSMASSREGELN FÜR DIE AUFSTELLUNG Das Gerät nicht an Plätzen abstellen oder betreiben, an denen es Feuer, Feuchtigkeit oder direkter Sonnenbestrahlung ausgesetzt ist. Ebenso sind Plätze in der Nähe von Heizkörpern und sonstigen Wärmenquellen zu vermeiden, an denen Umgebungstemperatur und Luftfeuchtigkeit nicht den vorgeschriebenen Betriebsbedingungen entsprechen, sowie Plätze, an denen das Gerät Öl, Metallspänen oder...
  • Page 139 Bei Auftreten jeglicher Störungen während des Betriebs den Drucker sofort ausschalten, und das Netzkabel aus der Steckdose ziehen. Die Beseitigung von Betriebsstörungen ist qualifiziertem Fachpersonal zu überlassen. Niemals versuchen, das Gerät eigenhändig zu zerlegen. Beim Öffnen/Schließen der Druckerabdeckung darauf achten, nicht die Hand oder Finger am Drucker einzuklemmen. iDP-3410 User’s Manual...

  • Page 140: Tägliche Wartung

    Das Netzteil nicht zusammen mit Geräten, die Rauschstörungen erzeugen, an die gleiche Steckdose anschließen. Das Zubehör-Netzteil nicht für den Anschluß anderer Geräte oder Vorrichtungen, sondern ausschließlich für diesen Drucker, verwenden. Beim Trennen des Netzteils von der Steckdose stets am Stecker anfassen; niemals iDP-3410 User’s Manual TÄGLICHE WARTUNG...
  • Page 141 User’s Manual am Kabel ziehen. Durch Ziehen am Netzadapter-Anschlußkabel können Schäden entstehen, die zu Bränden, elektrischen Schlägen oder gebrochenen Kabeldrähte führen. Bei einem Gewitter sollte das Netzteil von der Steckdose getrennt und der Drucker nicht verwendet werden. Ein Blitzschlag kann Brände und elektrische Schläge auslösen.

  • Page 142: Anschluß Des Schnittstellenkabels

    2. Den Ausschubmechanismusstecker korrekt ausgerichtet (Ober- und Unterseite prüfen) an die Geldschubladen- Ausschubmechanismusbuchse an der Rückwand des Druckers anschließen. 3. Das Erdungskabel der Geldschublade an das Erdungsterminal am Drucker anschließen. VORSICHT: Ausschließlich Ausschubmechanismusstecker anschließen. iDP-3410 User’s Manual vorgeschriebene Geldschublade (Solenoid)

  • Page 143: Einsetzen Der Farbbandkassette

    3. Die Farbbandkassette zwischen Druckkopfabdeckung und Walze einsetzen und gleichzeitig die Halteklauen in den Halter des Druckers drücken. 4. Das Farbband durch Drehen des Farbband-Kassettenknopfes in Pfeilrichtung straff wickeln. 5. Zum Herausnehmen der Farbbandkassette die Halteklauen an beiden Seiten zur Seite kippen und die Kassette anheben. iDP-3410 User’s Manual...

  • Page 144: Einlegen Der Papierrolle

    6. Das Papierende gerade in die Papiereinzugöffnung einführen (durch einen Pfeil an der Gehäusevorderseite angezeigt). 7. Das Druckpapier wird automatisch in den Drucker eingezogen, bis das Papierende aus der Papierauslauföffnung herauskommt. 8. Die Druckerabdeckung schließen und überschüssiges Papier an der Schneidklinge abreißen. iDP-3410 User’s Manual...
  • Page 145 User’s Manual VORSICHT Schlaffes Druckpapier durch Zurückdrehen der Papierrolle straffen. Bei schräg eingesetztem Druckpapier den Papier-Freigabehebels drücken und das Papier gerade richten. Die Druckerabdeckung niemals während des Druckens öffnen, da hierdurch Papierstaus entstehen können.

  • Page 146: Entfernen Des Restlichen Druckpapiers

    3. Den Papier-Freigabehebel in Pfeilrichtung drücken. Hierdurch wird die Papiervorschubwalze zurückgesetzt und das Papier freigegeben, so daß angestautes Papier beseitigt werden kann. 4. Sämtliche Papierreste aus dem Papierweg entfernen. VORSICHT Beim Herausziehen des Druckpapiers (in Vorwärts- oder Rückwärtsrichtung) darauf achten, den Papier-Freigabehebel zu betätigen. iDP-3410 User’s Manual...

  • Page 147: Bedienfeld Und Fehleranzeigelämpchen

    Zum Einschalten der Selbstdruckfunktion die FEED-Taste gedrückt halten und dabei gleichzeitig den Drucker einschalten. Betriebsfluß beim Einschalten Einschalten Feed SW ? Pufferdaten 1 Sek. vergangen iDP-3410 User’s Manual "Pufferdaten löschen" Ja (FEED SW) und vergrößerter Rot-Druck NEIN 1 Sek. vergangen...

  • Page 148: Dip Schalter-Einstellung

    5. DIP-SCHALTER-EINSTELLUNG Lage der DIP-Schalter (1) Betriebsstrom ausschalten. (2) Ein Kassettenband entfernen. Die DIP-Schalter liegen, wie in der Abbildung gezeigt. (Nur DS1 für Parallel- Schnittstelle vorhanden.) iDP-3410 User’s Manual NEIN...

  • Page 149: Dip-Schalter-Einstellungen

    Dänemark Schweden Italien Japan Siehe internationale Zeichencode-Tabelle und Schriftzeichen-Tabelle CR-Modus(DS1-6) Modus CR+LF STAR CR+LF ESC/POS CR+LF iDP-3410 User’s Manual Nein Siehe Tabelle unten Siehe Tabelle unten 42 Stellen 40 Stellen 6 kB 256 Byte Siehe Tabelle unten Zeichencode-Wahl ESC/POS- DS1-3...
  • Page 150 Die Einstellung des verwendeten Papiers ändert einfach den Treiberimpuls für den Druckkopf; sie bedeutet nicht, daß 2-Seiten-Papier nicht für die Einstellung 1P verfügbar ist. Das gleiche gilt, wenn 1-Seiten-Papier für die Einstellung 2P verwendet wird. iDP-3410 User’s Manual 8 Bit 7 Bit...

  • Page 151: Einstellung Der Vorwahl-Jumperstecker

    Dieser Drucker hat die Modi CBM, STAR und ESC/POS. Jeder gewünschte Modus kann gewählt und nach Bedarf eingestellt werden. (1) Einstellmethode Siehe 5. DIP-SCHALTER-EINSTELLUNG Unter bezug auf die Einstellungen der DIP-Schalter-Segmente 1-9 und 1-10 und die der Vorwahl- Jumperstecker jeden Modus einstellen. iDP-3410 User’s Manual Parallele Schnittstelle STAR ESC/POS 1-C * 1-C *...

  • Page 152: Wartung Und Dienst

    CBM America Corporation Service Center 365 Van Ness Way Suite 510 Torrance, CA 90501, USA TEL +1-310-781-1460 FAX +1-310-781-9157 iDP-3410 User’s Manual Andere Gebiete Japan CBM Corporation Information Systems Division CBM Bldg., 5-68-10, Nakano Nakano-ku, Tokyo 164-0001 Japan TEL +81-3-5345-7540...

Table of Contents

Save PDF