Specifications And Requirements - Tyco iSTAR Ultra G2 Quick Start Manual

Specifications and Requirements

Specifications
Environmental
Operational Temperature
Electrical (GCM)
Electrical Input
Electrical (ACM)
Vreader
Electrical Input
Vlock 1
Electrical Input
Vlock 2
Electrical Input
RS485/Wiegand/Aux
Electrical Output
Relay Ports (Dry - Primary and Secondary)
Electrical Output
Relay Ports (Wet - Primary and Secondary)
Electrical Output
Voltage tolerances are 85% - 100% of listed specifications.
NOTE
iSTAR Ultra G2 Controller Installation and Configuration Guide
Table 1: Environmental and Electrical Specifications
iSTAR Ultra G2 Specifications
32° F (0° C) to 120° F (49° C)
12 VDC or 24 VDC (4.5 A)
Up to 12 VDC or 24 VDC (12.5 A)
Up to 12 VDC or 24 VDC (12.5 A)
Up to 12 VDC or 24 VDC (12.5 A)
12 VDC (1.5 A) per reader.
Primary: 12 - 24 VDC (5 A)
Secondary: 12 - 24 VDC (1 A)
Primary: 12 - 24 VDC +/- 15% (0.75 A)
Secondary: 12 - 24 VDC +/- 15% (0.75 A)
3