Memory Operation; Memory Channels; Memory Channel Selection - Icom IC-R75 Instruction Manual

Memory channels

The receiver has 101 memory channels. The memory
mode is very useful for quickly changing to often-used
frequencies.
MEMORY
MEMORY
CHANNEL
CHANNEL
NUMBER
Regular memory
channels
Scan edge
memory P1, P2
channels

Memory channel selection

D Using the [UP Y] or [Z DN] keys
q Push [V/M] to select memory mode.
• "MEMO" appears.
w Push [UP Y] or [Z DN] several times to select the
desired memory channel.
• Push and hold [UP Y] or [Z DN] for continuous selec-
tion.
e To return to VFO mode, push [V/M] again.
USB
7
S1 3 5 9 20
V/M
USB
S1 3 5 7 9 20
UP
USB
S1 3 5 7 9 20
CAPABILITY
One frequency and one mode in
1–99
each memory channel.
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
R X
ANT 1 AGC
40 60dB
VFO
R X
ANT 1 AGC
40 60dB
MEMO
or
DN
R X
ANT 1 AGC
40 60dB
MEMO

MEMORY OPERATION

All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the tuning dial, etc. in memory mode.
TRANSFER
TO VFO
Yes
Yes
D Using the keypad
q Push [V/M] to select memory mode.
• "MEMO" appears.
w Push the desired memory channel number using
the keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
e Push [V/M] to select the desired memory channel.
r To return to VFO mode, push [V/M] again.
7
S1 3 5 9 20
V/M
S1 3 5 7 9 20
1
ABC
S1 3 5 7 9 20
6
OVER-
CLEAR
WRITING
Yes Yes
Yes No
USB R X
ANT 1 AGC
40 60dB
VFO
USB R X
ANT 1 AGC
40 60dB
MEMO
2
V/M
USB
R X
ANT 1 AGC
40 60dB
MEMO
21