Set Mode; I Entering Set Mode; I Set Mode Items - Icom IC-M45A Instruction Manual

I Entering SET mode

SET mode is used to customize operation of the transceiver
to suit your operating needs.
D To enter SET mode:
➀
While pushing [16], turn power ON.
• Keep pushing [16] until the initial SET mode display appears.
• SET mode is selected.
➁
To exit SET mode, turn power OFF then ON again.
D To select an item:
There are 5 items in SET mode that may be adjusted to suit
your operating needs.
➀
Select SET mode as above.
➁
Push [16] to select an item; then push [UP]/[DN] to set the
condition for the item.

SET MODE

I SET mode items

1 1 1
* * *
1 1
* *
Select a
1 1 1
* * *
SET mode
2
item*
1 1
* *
1
*
SET mode items above are shown at their
default conditions.
4
Beep tones (p. 12)
2 2 2
* * *
Normal/priority
2 2
*
* scan (p. 12)
Weather alert (p. 12)
2
*
Scan timer (p. 12)
2
*
Dual/tri-watch (p. 12)
2
*
Select a
SET mode
1
condition*
11