I Call Channel Programming; I Display Backlighting - Icom IC-M45A Instruction Manual

3
BASIC OPERATION

I Call channel programming

Pushing [ • 9] for 1 sec. selects the call channel, channel 9
16
by default, however you can program your most often-used
channels in each channel group for quick recall.
➀
While push and hold [H/L]
push [CH/WX] one or more
times to select the desired
channel group (USA, CAN,
INT) to be programmed.
➁
Push [ • 9] for 1 sec. to se-
16
lect the call channel of the se-
lected group.
• "CALL" and the call channel
number appear.
➂
Push [ • 9] for 3 sec. to enter
16
call channel write mode.
• Call channel and channel group
to be programmed flash.
➃
Push [UP] or [DN] to select
the desired channel.
10
➄
Push any switch to automati-
cally program the selected
channel.
• The transceiver returns to normal operation.

I Display backlighting

USA
The function display and switches can be backlit for better
visibility under low light conditions.
TAG
CALL
While pushing [
USA
backlighting.
• Backlighting can be set to 1 of 4 intensities or turned OFF.
CALL
USA
CALL
USA
CALL
USA
• DIM], push [UP] or [DN] to adjust the
H/L