Set Mode; I Set Mode Programming - Icom IC-M302 Instruction Manual

7

SET MODE

I Set mode programming

Set mode is used to change the conditions of the trans-
ceiver's functions: scan type (Normal or Priority,) scan re-
sume timer, Weather alert, Dual/Tri-watch, DSC watch, trans-
ceiver's beep tone and Auto ACK.
Available functions may differ depending on dealer setting.
D Set mode operation
q Turn power OFF.
w While pushing [16•
• " " appears on channel comment indicator.
e After the display appears, release [16•
r Push [16•
] to select the desired item, if necessary.
9
t Push [Y] or [Z] to select the desired condition of the item.
y Turn power OFF, then ON again to exit Set mode.
28
], turn power ON to enter Set mode.
9
].
9
D SET MODE CONSTRUCTION
Scan mode
Starting item
Push
Auto acknowledgement
Scrolls
Beep tone
Scan resume timer
Weather alert
Dual/tri watch
DSC watch
Scrolls