I Call Channel Programming - Icom IC-M302 Instruction Manual

I Call channel programming

Call channel is used to select Channel 9 (default), however,
you can program the call channel with your most often-used
channels in each channel group for quick recall.
q Push both [Y] and [Z]
on the transceiver one or
more times to select the
desired channel group
(U.S.A., International or
Canada) to be pro-
grammed.
w Push [16•
] for 1 sec. to
9
select the call channel of
the selected channel
group.
• "CALL" and call channel
number appear.
e Push [16•
] again for 3
9
sec. (until a long beep
changes to 2 short beeps)
to enter call channel pro-
gramming condition.
• Channel number starts
blinking.
r Push [Y] or [Z] to select
the desired channel.
t Push [16•
] to program
9
the displayed channel as
the call channel.
• Push [CH/WX ] to
•DUAL
cancel.
• The channel number stops
blinking.
BASIC OPERATION
3
3
9