Dualwatch/Tri-Watch; I Description; I Operation - Icom IC-M302 Instruction Manual

I Description

Dualwatch monitors Channel 16 while you are receiving
another channel; Tri-watch monitors Channel 16 and the call
channel while receiving another channel.
DUALWATCH/TRI-WATCH SIMULATION
Dualwatch
• If a signal is received on Channel 16, Dualwatch/Tri-watch
pauses on Channel 16 until the signal disappears.
• If a signal is received on the call channel during Tri-watch,
Tri-watch becomes Dualwatch until the signal disappears.
• To transmit on the selected channel during Dualwatch/Tri-
watch, push and hold [PTT].

DUALWATCH/TRI-WATCH

Call channel
Tri-watch

I Operation

q Select Dualwatch or Tri-watch in Set mode. (p. 29)
w Select the desired operating channel.
e Push [CH/WX•
] for 1 sec. to start Dualwatch or Tri-
DUAL
watch.
• " " blinks during Dualwatch; "
• A beep tone sounds when a signal is received on Channel 16.
r To cancel Dualwatch/Tri-watch, push [CH/WX•
again.
[Example]: Operating Tri-watch on INT Channel 25
4
" blinks during Tri-watch.
DUAL
Tri-watch starts.
Signal is received on call
channel.
Signal is received on
Channel 16 takes priority.
Tri-watch resumes after
the signal disappears.
3
4
]
11