I Scan Resume Condition - Icom IC-V8 Instruction Manual

8
SCAN OPERATION

I Scan resume condition

When a signal is received during scanning, the scan resume
condition determines what action the transceiver takes. The
transceiver has 2 scan resume conditions available as illustrated at
right. Use
q
Push [A•
w
Push [Y] or [Z] several times until "SCP" or "SCt" appears.
e
Rotate [VOL] to select the desired scan resume condition.
• Pause scan:
When receiving a signal, scan pauses on
the signal until it disappears. Resumes 2
sec. after the signal disappears.
• Timer scan:
When receiving a signal, scan pauses on
the signal for 5 sec., 10 sec. or 15 sec., then
resumes.
r
Push [#•
36
to select the one which best suits your needs.
SET MODE
], then push [8•
FUNC
] to set and exit
ENT
] to enter
SET SET MODE
.
SET MODE
SET MODE
USING
.
F
TX
MR
Pause scan
F
TX
MR
Timer scan