Basic Operation; I Power On; I Setting A Frequency - Icom IC-V8 Instruction Manual

4

I Power ON

Push [POWER] for 1 sec. to turn
power ON.

I Setting a frequency

D Via the keypad
q Push [D•
w To enter the desired frequency, enter 6-digits starting from the
100 MHz digit.
• Enter three to five digits then pushing [#•
frequency.
• When a digit is mistakenly input, push [D.
• Example 1— when entering 145.525 MHz
Push
• Example 2— when entering 144.800 MHz
Push
16

BASIC OPERATION

] to select VFO mode, if necessary.
CLR
Push for 1 sec.
ENT
] to abort inputting.
CLR
] is also set the