I Memory Transferring - Icom IC-V8 Instruction Manual

6
MEMORY/CALL OPERATION

I Memory transferring

Memory (call) channel contents can be transferred to the VFO or
to another memory channel.
D Memory/call ➾ VFO
q
Select the memory (call) channel to be
transferred:
➥
Push [C•
memory (call) mode.
➥
Push [Y] or [Z] to select the mem-
ory channel.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the mem-
ory channel. (pgs. 17, 53)
w
Push [A•
1 sec. to transfer the selected memory
contents to the VFO.
• VFO mode is selected automatically.
D Memory/call ➾ call/memory
q
Select the memory (call) channel to be transferred:
➥
Push [C•
➥
Push [Y] or [Z] to select the memory channel.
• When [VOL] is assigned as tuning dial, rotate [VOL] to select the
memory channel. (pgs. 17, 53)
w
Push [A•
• "--" and " X " blink.
e
Push [Y] or [Z] to select the target memory.
• When [VOL] is assigned as tuning dial, rotate [VOL] to select the
target channel. (pgs. 17, 53)
r
Push [A•
• Memory mode is selected and the contents are transferred to
the target memory.
28
] or [ B•
MR
CALL
], then push [C•
FUNC
] or [ B•
MR
CALL
], then push [C•
FUNC
], then push [C•
FUNC
[VOL]
] to select
[C•
[Y]
[Z]
[A•
[B•
] for
MR
[8•
] to select the memory (call) mode.
] momentarily.
MR
] for 1 sec.
MR
]
MR
]
FUNC
]
CALL
]
SET