I Transmitting A Dtmf Code; I Dtmf Transmission Speed - Icom IC-V8 Instruction Manual

I Transmitting a DTMF code

D Using a DTMF memory channel
q
Push [A•
FUNC
ory.
w
Rotate [VOL] to select the desired channel.
e
Push [SQL] or [PTT] to exit the DTMF memory mode.
r
While pushing [PTT], push [SQL] to transmit the selected DTMF
memory.
• After the DTMF code is transmitted, the transceiver returns to re-
ceive automatically.
D Manual DTMF code transmission
While pushing [PTT], push digit keys, A–F to transmit a DTMF code
manually.
I DTMF
transmission speed
When slow DTMF transmission speeds are required with DTMF
memory transmission (as for some repeaters), the transceiver's rate
of DTMF transmission can be adjusted.
q
While pushing [Y] and [Z], turn the power
on to enter
INITIAL SET MODE
w
Push [Y] or [Z] several times until "dtd"
appears.
e
Rotate [VOL] to select the desired DTMF
transmission speed.
• Four speeds are available: "1" (100 msec.
intervals) is the fastest; "5" (500 msec. intervals) is the slowest.
r
Push [#•
ENT
], then push [0•
.
] to exit
INITIAL SET MODE
- ] to enter the DTMF mem-
DTMF M
INITIAL SET MODE
USING
.
DTMF MEMORY
F
TX
MR
F
TX
MR
7
7
31