Icom IC-V8 Instruction Manual page 28

3
BATTERY PACKS
D About AD-99
Attach the spacer (Spacer B/C) to the adapter (Spacer A) with ori-
entation as illustrated in the diagram below.
• Attach the spacer (Spacer B/C) to the adapter with the orientation
of the stamp "
When removing the spacer (Spacer B/C), push the notch carefully
with your finger to remove the spacer (Spacer B/C) from the adapter
(Spacer A).
Remove the spacer (Spacer B/C)
from the adapter.
Push the notch
carefully.
R CAUTION!
DO NOT push or force the notch with a screw driver, etc., to re-
move it.
DO NOT bend the notch when the adapter and spacer are not
joined together. This will cause weakening of the notch plastic.
Both cases may break the notch and it may not be able to be
reattached.
12
Spacer A
Spacer B/C
" pointing up.
Check orientation
and