Dtmf Memory; I Programming A Dtmf Code; I Transmitting A Dtmf Code - Icom IC-T2H Instruction Manual

7

DTMF MEMORY

I Programming a DTMF code

The transceiver has 5 DTMF memory channels (d1 to d5) for
storage of often-used DTMF codes of up to 32 digits.
➀
f
Push [ (DTMF)] to enter DTMF
memory.
• One of "d1" to "d5" appears.
➁
Push [Y]/[Z] to select the desired
channel.
➂
f
Push [ (DTMF)] for 1 sec. to enter
DTMF programming mode.
• "_ _ _ _ _" appears.
• Programmed
cleared in this way.
➃
Push the digit keys to enter the desired DTMF code.
• A maximum of 32 digits can be input.
• If a digit is mistakenly input, push [
➄
f
Push [ (DTMF)] to input the
digits and exit DTMF programming mode.
• A beep sounds.
22
memories can be
] then repeat from step ➀.

I Transmitting a DTMF code

D Using a DTMF memory channel
➀
Push [ f (DTMF)] to enter DTMF memory mode.
➁
Push [Y]/[Z] to select a DTMF memory channel to trans-
mit.
➂
f
Push [ (DTMF)] to transmit the displayed DTMF memory.
• After the DTMF code is transmitted, the transceiver automatically
returns to normal operating mode.
D Manual DTMF code transmission
➀
While pushing [PTT], push digit keys to transmit a DTMF
code manually.
➁
Release [PTT] to return to receive.
✔ CONVENIENT
DTMF re-dial function: This function automatically re-trans-
mits the previously sent DTMF code. This is especially con-
venient when you want to re-transmit a manually transmitted
DTMF code.
f
Push [ (RE-DIAL)] to activate the function. See p. 31 to as-
sign this function to a switch, if necessary.
NOTE: Once the transceiver is turned off, any temporarily
memorized DTMF contents will be cleared.