I Selecting A Memory Channel; I Lock Function - Icom IC-T2H Instruction Manual

✔ Convenient
Monitor function: Push and hold [
nals that do not open the squelch; or push [
itor a signal without having to continuously hold [
Squelch control: The transceiver employs a noise pulse
count system and therefore, squelch is adjusted automatically
when "AUto" is selected for the squelch level:
Push [SQL], then push [Y]/[Z] one or more times until "AUto"
appears. Manual levels from "Sql 1" to "Sql 8" are also avail-
able to suit personal preferences and operating conditions.
] to listen to weak sig-
] twice to mon-
].

I Selecting a memory channel

➀
Push [ V] to select memory chan-
A
nel mode, if necessary.
• "X" appears.
➁
Push 2 digit keys to select the de-
sired memory channel (or push the
[Y]/[Z] keys).
• The first nine memory channels are
preceded by a "0."
• When you want to select scan edge
channels PA or Pb, push [4], [1] or [4],
[2], respectively.

I Lock function

The lock function prevents accidental frequency changes and
accidental function activation. By default, [
function on and off.
Push [ L] for 1 sec. to toggle the function on and off.
D
• "é" appears while the lock func-
tion is activated.
• [PTT], [PWR/VOL] and [
used regardless of this setting.
4
BASIC OPERATION
P
0
MR
4 0
MR
L] toggles this
D
]can be
13