Table of Contents
Advertisement
ATTACH PAN SUPPORTS
Securely locate all pan supports ensuring
they are the installed in the correct
orientation and do not rock.
COOKTOP BURNERS
lifting off
To check that the ignition system operates correctly, light the burner.
z
Check for a well-defined blue flame without any yellow tipping.
z
If any abnormality is evident, check that the components of the burner assembly are
z
located properly.
No air shutter adjustment is possible on the cooktop. Correct operation is achieved with
z
factory installed settings for the correct gas type.
When installing the burner spreader, align the two location features in the bottom of the
z
spreader with the locating notch in the top side of the burner base and make sure these
are properly engaged.
Incorrect installation may produce a potentially dangerous flame and result in poor
z
burner performance.
If proper operation cannot be obtained, contact Customer Care or your nearest
z
Fisher & Paykel Authorised Service Centre.
The cooktop must not be used until proper operation has been achieved.
z
TEST BURNERS
yellow tip
stable blue flame
19
Advertisement
Table of Contents
