Table of Contents
Advertisement
H
A
f
b
D
E
i
C
C
CLEARANCES — CGI905D MODELS
CLEARANCE DIMENSIONS
A Minimum clearance from top of trivets to:
f
B Minimum clearance below bench top to:
C Minimum clearance from side of cutout to nearest adjacent combustible surface
D Minimum distance from right edge of cooktop to gas connection point on wall
E Distance from floor to gas connection point on wall
F Minimum clearance from countertop to overhead cabinet
G Maximum depth of overhead cabinetry
H Minimum distance between overhead cabinets
I Minimum clearance from rear edge of cutout to nearest:
g
Ensure there is an earthed power outlet within 900mm of the centre rear of the product. The gas
connector on the wall should be accessible with the product installed.
*Combustible surface definition
Any materials of a building structure or decorative structure made of wood, compressed paper,
plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being
ignited and burned. Such material shall be considered combustible even though flame-proofed,
fire-retardant treated or surface-painted, or plastered.
Rangehood
z
Overhead exhaust fan
z
Downward facing combustible surface*
z
Downwards-facing tiled or fire resistant surface
z
Combustible surface
z
Fisher & Paykel oven or nearest non-combustible surface
z
(if using a flexible hose)
(if using a flexible hose)
(not directly above the cooktop)
(centered above cooktop)
Combustible surface
z
Non-combustible surface
z
CGI905D
MM
650
800
650
500
70
65
115
250
800-850
450
600
900
85
45
11
Advertisement
Table of Contents
