Table of Contents
Advertisement
1
elbow* washer
2
3
Fit the elbow and washer to the
floating nut. Turn the cooktop
over carefully and place onto a
protected surface ensuring the
ignitor won't be damaged.
floating nut
Apply adhesive foam seal around
the glass overhang, 5mm in from
the edge of the glass.
Ensure the adhesive side is facing
down to form a continuous seal
around the cooktop.
Trim any excess seal using a
sharp knife taking care not to
damage the cooktop or surface.
Gently lower the cooktop into the
cutout ensuring you have access
below the countertop to fit and
secure the brackets.
*(1/2" BSP external thread)
PROUD INSTALLATION
4
5
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height is
determined by the thickness of
your countertop.
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
*The number of brackets varies based on your cooktop model
15
Advertisement
Table of Contents
